Bluetooth Operation - Jensen VX7020N Installation & Owner's Manual

VX7020N OPERATION
1
3
4
Preparation
Pairing a New Device
Connecting a
Paired Device
Bluetooth Phone
Main Menu
Current Mode Indicator
Phone Keypad
Keypad
Incoming Call
Dialed Call
Connect or End Call
18

Bluetooth Operation

2
5 6
Before you can use a Bluetooth device, it must be paired and
connected. Make sure that Bluetooth is activated on your device
before you begin the pairing process.
The unit broadcasts the pairing signal constantly when no devices
are currently connected. Complete the pairing sequence from your
Bluetooth device. Refer to the owner's manual for your device
for more details. The device name is "VX7020N".
passcode "5309".
pairing is performed.
Most Bluetooth devices support the auto-connect feature and will
connect automatically if the device is in range when the unit is
powered-on. If your device was previously paired but does not
connect, enter the Bluetooth setup menu and ensure that Auto
Connect is On.
To access the phone, select Bluetooth Phone from the Main Menu.
Press to return to the Main Menu screen.
1
Displays current mode of operation.
2
Use the phone keypad to dial the desired phone number.
3
Alternately, numbers can be dialed directly from the phone.
Press to display keypad and dial a number.
4
Press to display a list of received calls. Use the up/down arrows to
5
scroll through the list, and press desired number to connect a call.
Press to display a list of outoing calls. Use the up/down arrows to
6
scroll through the list, and press desired number to connect a call.
7
Press after dialing a number to connect a call. Press
during a phone call to end the call.
7
The unit can be in any mode of operation when
The Bluetooth