Am/fm/rbds/wb/usb/aux-in/bt/sirius xm ready heavy duty radio (22 pages)
Summary of Contents for Jensen AWM960
Page 1
AWM960 Owner’s Manual PUSH ON/OFF AWM960 TUN/TRK AM/FM ALARM MUTE ALARM AS/PS ON/OFF LOUD STOP LANG ENTER MENU DVD/CD/MP3 PLAYER CD-RW AUX A/V IN SPEAKER JENSEN SPEAKER SPEAKER...
AWM960 Installation Select Mounting Location Select a mounting location, taking care to avoid the following: • Places exposed to heat-radiating app liances such as electric heaters • Adjacent to other equipment that radiates heat • Poorly-ventilated or dusty places •...
AWM960 Basic Operation 1. Power / Volume Control Press the power button (1) to turn the unit on or off. This button also serves as the volume control knob; rotate clockwise or counterclockwise to increase or decrease the volume output.
3.5mm A/V cable adapter. Connect the device to the A/ input on the front panel, and press AUX to engage the input circuit. Please note that there are several A/V cable "standards" which differ from each other. The AWM960 is designed to support the Apple Video iPod cable type, as shown in the inset drawing.
AWM960 Tuner Operation 10. Select a Band Press AM/FM (10) momentarily to directly access tuner mode from any other function mode. When the unit is already in tuner mode, briefly press AM/FM to change between two AM bands (AM1 and AM2) and three FM bands (FM1, FM2 and FM3).
Page 8
12. Preset Stations Store Preset Stations Six numbered preset buttons (12) store and recall stations for each AM and FM band. To store a station, select a band (if needed), then select a station. Hold a preset button for three seconds. The current station will be stored, and the corresponding preset number will appear in the display.
AWM960 CD Operation 14. Insert and Eject CD Insert CD Insert a CD label-side up into the CD slot (14a), and the disc will begin to play. Eject CD Press the eject button (14b) to stop CD play and eject the CD.
17. Intro Scan (INT) Press and hold INT(17) for more than three seconds during disc play to play the first 10 seconds of each track on the current disc. Press INT again to end the scan and play the selected track. 18.
AWM960 DVD Operation (continued) The included remote control operations many functions of the unit, including DVD functions. The following buttons on the remote correspond with buttons on the front panel of the radio to control basic, tuner and CD functions in the same manner as described in those sections: Remote Control Basic, Tuner &...
Page 12
39. Numeric Buttons To directly access a track, press the corresponding numeric button (1-9) (39). To access a track with a number of 10 or greater, press 10+, then the other numbers. For example, to access track 12, press 10+, then 1, then 2.
AWM960 DVD Operation (continued) DVD Setup Press SETUP on the remote control to access setup mode, which allows setup of the following four DVD functions: • System Setup • Language Setup • Audio Setup • Video Setup While in the setup menus, use your directional arrows to select and change settings. The “up” and “down”...
Language Setup The language setup menu controls the following features: LANGUAGE SETUP OSD LANGUAGE ENGLISH AUDIO LANG GERMAN SUBTITLE LANG SPANISH MENU LANG FRENCH PORTUGUESE EXIT SETUP ITALIAN On-Screen Display Language: Set the on-screen display language ON. Audio Language: Set the audio language to one of the following: English, German, Spanish, French, Portuguese or Italian.
AWM960 DVD Operation (continued) Video Setup The video setup menu controls the following features: VIDEO SETUP BRIGHTNESS CONTRAST SATURATION SHARPNESS EXIT SETUP Brightness: Adjust the brightness of the screen from the following levels: 12, 10, 8, 6, 4, 2 or 0.