Authenticate Conf File
Factory Reset
MAINTENANCE/SYSLOG
Syslog Server
Syslog Level
MAINTENANCE/LOGCAT
Clear Log
Log Tag
Log Priority
MAINTENANCE/DEBUG
Capture Trace
View Trace
Firmware Version 1.0.1.20
Authenticates configuration file before acceptance. The default setting is
"No".
Click "Reset" to restore to factory default settings. Users can select to
clear the SD card in phone' storage for factory reset.
The URL/IP address for the syslog server. The default setting is
"log.ipvideotalk.com".
Selects the level of logging for syslog. The default setting is "None".
There are 4 levels: DEBUG, INFO, WARNING AND ERROR. Syslog
messages are sent based on the following events:
Product model/version on boot up (INFO level);
NAT related info (INFO level);
Sent or received SIP message (DEBUG level);
SIP message summary (INFO level);
Inbound and outbound calls (INFO level);
Registration status change (INFO level);
Negotiated codec (INFO level);
Ethernet link up (INFO level);
SLIC chip exception (WARNING and ERROR levels);
Memory exception (ERROR level).
Press the clear log button to clear log.
Specifies the log tag to filter the log.
Selects the log priority. The log priority options are: Verbose, Debug,
Info, Warn, Error, Fatal, Silent (suppress all output).
Press START to start capturing a trace, and press STOP to stop the
capture process.
Press LIST to view the list of captured traces in web browser. It will show
the time when the trace was captured. Click on the name of the file to
download and view the trace.
GXV3275 Administration Guide
Page 58 of 77