Maintenance/Syslog - Grandstream Networks GXV3240 Administration Manual

Automatic Upgrade Check
Interval (m)
Hour of the Day (0-23)
Day of the Week (0-6)
Firmware Upgrade and
Provisioning
Disable SIP NOTIFY
Authentication
Auto Reboot to Upgrade
Without Prompt
Factory Reset

MAINTENANCE/SYSLOG

Syslog Server
Syslog Level
Firmware Version 1.0.3.46

"Check at a period of time"
The default setting is "No".
It is used to configure how often the phone system will check the server
for new firmware and configuration file downloading. It only valid if the
user select "Check at a period of time" in the "Automatic Upgrade".
The default setting is 10080 (namely 7 days).
It is used to define at which hour of the day they phone system will
check the HTTP/TFTP server for firmware upgrades or configuration
files changes. The default setting is "1".
It is used to define on which day of the week the phone system will
check the HTTP/TFTP server for firmware upgrades or configuration
files changes. The default setting is "1".
It is used to define the phone system's rules for automatic upgrade.
It can be selected from

Always Check at bootup

When F/W pre/suffix changes,

Skip the Firmware Check.
The default setting is "Always Check at bootup".
This is used to configure whether to disable SIP NOTIFY
Authentication on the phone. If set to "Yes", phone will not challenge
NOTIFY with 401. The default setting is "No".
It is used to set if the phone system will pop up a notification message
before upgrading new firmware. If set to "Yes", the phone will
automatically start upgrading after downloading the firmware file.
Otherwise, users would need to confirm in the prompted message on
the LCD screen to start upgrading process. The default setting is "Yes".
It is used to reset the phone system to the default factory setting mode.
If the "Clear the SD card" is checked, the SD card storage mounted to
the phone will be format as well.
It is used to configure the URI which the phone system will send the
syslog messages to.
The default setting is "log.ipvideotalk.com".
It is used to selects the level of logging for syslog. The default setting
is "None". There are 4 levels from the dropdown list: DEBUG, INFO,
WARNING and ERROR. The following information will be included in
GXV3240 Administration Guide Page 88 of 117