Transmitting A Document Using Group Dial - Minolta MINOLTAFAX 1600 Operator's Manual

5-11
Using the SET Utilities
29
This completes the procedure for registering
destinations in a Group Dial.
To register another Group Dial, press
another unused One Touch key from among
17, 18, 19, or 20.
Example: Using One Touch key 18
OT18

Transmitting a Document Using Group Dial

1
Check that the message "SET DOC. FACE
DOWN" is shown on the Message Display.
JUN. 8 15:38
- SET DOC. FACE DOWN -
Select the resolution.
Place the document on the Document
½
Feeding Tray. p. 3-4
2
Press the One Touch key in which the
desired Group Dial has been registered.
Example: One Touch key 17
→JAPAN group
OT17
• The document placed on the Document
Feeding Tray is fed in and the fax starts
scanning it.
• When the fax completes scanning the
document into memory, it starts dialing the
destinations, one by one, in the order they
were registered.
• Upon connection to the destination, the
document is transmitted.
• The document transmission sequence is
repeated for the number of destinations
registered in that particular group.
3
To stop the transmission, press the Stop key.
4503UO18
100%
½
4503U229
p. 3-2
4503U01I
4503UO17
Stop
4503U17I
From here on, go back to step 3 and repeat the
procedure.
GROUP DIAL 18
4
When the transmission is completed, a
buzzer sounds once and a message
indicating that the transmission has been
normally completed appears and remains
shown for 2 sec. Then, the initial screen
reappears.
TX COMPLETE
TOKYO
TX Result Report is starting print.
TX RESULT
FUNCTION No. DESTINATION STATION
TX 1 OSAKA
E3810 : ERROR PAGES DURING TX
ERROR PAGE : 1 , 2
4503U527
1
½
4503U307
p. 9-3
REPORT
DATE TIME PAGE COMM.TIME MODE RESULT
OCT.27 17:20 3 0H 01' 32" STD NG
4503U904