Setting up
Attaching the terminal cover
Claw
Insert the two claws of the Terminal cover into the hole of
the case and confirm Hook is fitting into the case.
Insert the two claws of the Terminal cover into the hole of
the case and confirm Hook is fitting into the case.
NOTE
• The Terminal cover cannot be attached depending on the cable you
use.
2 4
Terminal cover A
When detaching the Terminal cover, push the Hook
in the direction of the arrow and pull it forward.
Terminal cover B
Claw
When detaching the Terminal cover, push the Hook
in the direction of the arrow and pull it forward.
Hook
Do not hold the terminal cover when
moving the projector.
Hook
Do not hold the terminal cover when
moving the projector.