Table of Contents
Advertisement
Troubleshooting
If an abnormal operation should occur, stop using the projector immediately.
WARNING
smoke, strange odor, excessive sound, damaged casing or elements or cables,
penetration of liquids or foreign matter, etc. should occur. In such cases,
immediately disconnect the power plug from the power outlet. After making sure
that the smoke or odor has stopped, contact to your dealer or service company.
Otherwise if a problem occurs with the projector, the following checks and
measures are recommended before requesting repair.
If this does not resolve the problem, please contact your dealer or service
company. They will tell you what warranty condition is applied.
Related messages
When some message appears, check and cope with it according to the following
table. Although these messages will be automatically disappeared around several
minutes, it will be reappeared every time the power is turned on.
Message
(continued on next page)
►Never use the projector if abnormal operations such as
Troubleshooting
There is no input signal.
Please confirm the signal input connection, and the
status of the signal source.
Projector is waiting for an image file.
Check the hardware connection, settings on the projector
and network-related settings.
The computer-Projector network connection might be
disconnected. Please re-connect them.
Troubleshooting
Description
1 0 7
Advertisement
Table of Contents
