Advertisement
5. Place new felt pad square into opening.
6. Replace cover and fasten both screws.
7. Turn printer right side up and open cover.
8. Slide the print head to the left.
9. Use a needle-nose pliers or similar tool to pull old felt strip
out of its trough.
IMPORTANT!
Observe the notches on the felt strip.
10. Slide the end of the felt strip without notches into opening,
as shown.
11. Fold felt strip down into trough so small tabs fit into notches
on felt.
12. Use a needle-nose pliers or similar tool to press felt
securely into place.
© 2018 Brady Corporation. All Rights Reserved.
Felt Pad
Felt Strip
Advertisement
