Frequency / Voltage Control - Gigabyte GA-K8VM800M User Manual

2-7

Frequency / Voltage Control

K8 CPU Clock Ratio
CPU Host Clock Control
x CPU Host Frequency
PCI/AGP Frequency
CPU OverVoltage Control
AGP OverVoltage Control
: Move Enter: Select
F5: Previous Values
Incorrect using these features may cause your system broken. For power end-user use only.
K8 CPU Clock Ratio
Default
x4 800Mhz ~ x10 2000Mhz
CPU Host Clock Control
Note: Please note that if your system is overclocked and cannot restart, please wait 20secs.
for automatic system restart or clear the CMOS setup data and perform a safe restart.
Disabled
Enabled
CPU Host Frequency (Mhz)
200MHz ~455MHz
PCI /AGP Frequency(Mhz)
The values depend on CPU Host Frequency(Mhz).
CPU OverVoltage Control
Auto
+5%
+7.5%
+10%
Incorrect using it may cause your system broken. For power End-User use only!
AGP OverVoltage Control
Auto
+0.1V
+0.2V
Increase AGP voltage may get stable for Over_Clock. But it may damage to AGP Card when
enable this feature.
GA-K8VM800M(-RH) Motherboard
CMOS Setup Utility-Copyright (C) 1984-2005 Award Software
Frequency/Voltage Control
[Default]
[Disabled]
200
33/66
[Auto]
[Audo]
+/-/PU/PD: Value
F6: Fail-Safe Defaults
Set K8 CPU Clock Ratio to CPU factory default. (Default value)
Set K8 CPU Clock Ratio from x4 800Mhz to x10 2000Mhz.
Disable CPU Host Clock Control.(Default value)
Enable CPU Host Clock Control.
Set CPU Host Frequency from 200MHz to 455MHz.
BIOS will automatically detect CPU voltage. (Default value)
Set CPU OverVoltage Control to +5%.
Set CPU OverVoltage Control to +7.5%.
Set CPU OverVoltage Control to +10%.
BIOS will automatically detect AGP voltage. (Default value)
Set AGP OverVoltage Control to +0.1V.
Set AGP OverVoltage Control to +0.2V.
- 40 -
Menu Level
F10: Save ESC: Exit
F7: Optimized Defaults
Item Help
F1: General Help