Onboard Fdc Controller - Gigabyte GA-K8VM800M User Manual

OnChip Serial ATA
Enabled Enable VT8237R / VT8237R+ Serial ATA supported. (Default value)
Disabled Disable VT8237R / VT8237R+ Serial ATA supported.
SATA Mode
RAID Set onboard SATA mode to RAID. (Default value)
IDE Set onboard SATA mode to IDE.
AC97 Audio
Auto Enable onboard AC'97 audio function. (Default value)
Disabled Disable this function.
VIA Onboard LAN
Enabled Enable VIA onboard LAN function. (Default value)
Disabled Disable this function.
USB 1.1 Controller
Disabled Disable USB 1.1 controller.
Enabled Enable USB 1.1 controller. (Default value)
USB 2.0 Controller
Disabled Disable USB 2.0 controller.
Enabled Enable USB 2.0 controller. (Default value)
USB Keyboard Support
Enabled Enable USB keyboard support.
Disabled Disable USB keyboard support. (Default value)
USB Mouse Support
Enabled Enable USB mouse support.
Disabled Disable USB mouse support. (Default value)
On-Chip LAN Boot ROM
This function decide whether to invoke the boot ROM of the onboard LAN chip.
PXE Set On-Chip LAN Boot ROM to PXE.
RPL Set On-Chip LAN Boot ROM to RPL.
Disabled Disable this function. (Default value)

Onboard FDC Controller

Enabled Enable onboard FDC Controller. (Default value)
Disabled Disable onboard FDC Controller.
Onboard Serial Port 1
Auto BIOS will automatically setup the Serial port 1 address.
3F8/IRQ4 Enable onboard Serial port 1 and address is 3F8/IRQ4. (Default value)
2F8/IRQ3 Enable onboard Serial port 1 and address is 2F8/IRQ3.
3E8/IRQ4 Enable onboard Serial port 1 and address is 3E8/IRQ4.
2E8/IRQ3 Enable onboard Serial port 1 and address is 2E8/IRQ3.
Disabled Disable onboard Serial port 1.
GA-K8VM800M(-RH) Motherboard - 34 -