Pc Health Status - Gigabyte GA-73VM-S2 User Manual

2-8

PC Health Status

Reset Case Open Status
Case Opened
Vcore
DDR2 1.8V
+3.3V
+12V
Current System Temperature
Current CPU Temperature
Current CPU FAN Speed
Current SYSTEM FAN Speed
CPU Warning Temperature
CPU FAN Fail Warning
SYSTEM FAN Fail Warning
CPU Smart FAN Control
CPU Smart FAN Mode
: Move Enter: Select
F5: Previous Values
Reset Case Open Status
Keeps or clears the record of previous chassis intrusion status. Enabled clears the record of
previous chassis intrusion status and the Case Opened field will show "No" at next boot. (Default:
Disabled)
Case Opened
Displays the detection status of the chassis intrusion detection device attached to the motherboard
CI header. If the system chassis cover is removed, this field will show "Yes", otherwise it will
show "No". To clear the chassis intrusion status record, set Reset Case Open Status to Enabled,
save the settings to CMOS, and then restart your system.
Current Voltage(V) Vcore/DDR2 1.8V/+3.3V/+12V
Displays the current system voltages.
Current System/CPU Temperature
Displays current system/CPU temperature.
Current CPU/SYSTEM FAN Speed (RPM)
Displays current CPU/system fan speed.
CPU Warning Temperature
Sets the warning threshold for CPU temperature. When CPU temperature exceeds the threshold,
BIOS will emit warning sound. Options are: Disabled (default), 60
176 F, 90 C/194
o o
CPU/SYSTEM FAN Fail Warning
Allows the system to emit warning sound if the CPU/system fan is not connected or fails. Check
the fan condition or fan connection when this occurs. (Default: Disabled)
CMOS Setup Utility-Copyright (C) 1984-2007 Award Software
+/-/PU/PD: Value
F6: Fail-Safe Defaults
F.
o
PC Health Status
[Disabled]
Yes
1.330V
1.840V
3.360V
12.112V
39 o C
37 o C
3245 RPM
0 RPM
[Disabled]
[Disabled]
[Disabled]
[Enabled]
[Auto]
F10: Save
- 45 -
Item Help
Menu Level
ESC: Exit F1: General Help
F7: Optimized Defaults
C/140 F, 70 C/158
o o o
F, 80 C/
o o
BIOS Setup