Chapter 3 Drivers Installation; Installing Chipset Drivers - Gigabyte GA-73VM-S2 User Manual

Chapter 3 Drivers Installation

• Before installing the drivers, first install the operating system. (The following instructions
use Windows XP as the example operating system.)
• After installing the operating system, insert the motherboard driver disk into your optional
drive. The driver Autorun screen is automatically displayed which looks like that shown in
the screen shot below. (If the driver Autorun screen does not appear automatically, go to
My Computer, double-click the optical drive and execute the Run.exe program.)
3-1

Installing Chipset Drivers

After inserting the driver disk, "Xpress Install" will automatically scan the system and then list all the
drivers that are recommended to install. Please select the item that you wish to install and press the
Install button following the item. Or you can press Xpress Install to install all the driver items.
• Please ignore the popup dialog box(es) (e.g. the Found New Hardware Wizard)
displayed when "Xpress Install" is installing the drivers. Failure to do so may affect the
driver installation.
• Some device drivers will restart your system automatically during the driver installation.
After the system restart, "Xpress Install" will continue to install other drivers.
• After the drivers are installed, follow the onscreen instructions to restart your system. You
can install other applications included in the motherboard driver disk.
• After "Xpress Install" installs all the drivers and after system restarts, if a popup dialog box
still appears asking for installation of the RAID controller driver, please insert the motherboard
driver disk and select to install the driver automatically in the dialog box.
• For USB 2.0 driver support under the Windows XP operating system, please install the
Windows XP Service Pack 1 or later. After installing the SP1 (or later), if a question mark still
exists in Universal Serial Bus Controller in Device Manager, please remove the
question mark (by right-clicking your mouse and select Uninstall) and restart the system.
(The system will then autodetect and install the USB 2.0 driver.)
- 53 - Drivers Installation