Gigabyte GA-73VM-S2 User Manual page 72

Step 5:
Next, select the hard drives which you wish to be included in the disk array. The Free Disks block
displays the information about the SATA hard drives that are available for use as RAID array drives.
Press <Tab> to move to the Free Disks block. Select the target hard drives using the up or down arrow
key and use the right arrow key to add the hard drives to the Array Disks block (Figure 5).
RAID Mode: Striped
Free Disks
Port Disk Model
[ESC] Quit
Step 6:
After assigning the RAID drives, press <F7>. A message which says "All data on new(or added) disks
will be overwritten. Continue?" appears (Figure 6). To overwrite the data in the selected hard drives,
press <Y> to confirm or press <N> to cancel. (If the hard drives contain a previously created RAID
array, you need to press <Y> to clear the data in the hard drives.) If you confirm Yes to the prompt
above, the "Clear MBR?" prompt appears. Press <Y> to clear or <N> to abort. (We recommend that you
clear the MBR to reduce drive errors.)
RAID Mode: Striped
Free Disks
Port Disk Model
[ESC] Quit
GA-73VM-S2 Motherboard
MediaShield BIOS Jul 27 2007
- Define a New Array -
Capacity
[F6] Back [F7] Finish
MediaShield BIOS Jul 27 2007
- Define a New Array -
All data on new(or added) disks will be overwritten. Contiune?
Capacity
[Y] YES
[F6] Back [F7] Finish
Stripe Block:
Array Disks
Port Disk Model
0.0 ST3120026AS
0.2 ST3120026AS
[ ] Add
[ ] Del
[TAB] Navigate [
Figure 5
Stripe Block:
Array Disks
Port Disk Model
Clear disk data ?
1.0.M ST3120026AS
[Y] YES [N] NO
1.1.M ST3120026AS
[ ] Add
[N] NO
[ ] Del
[TAB] Navigate [
Figure 6
- 72 -
Optimal
Capacity
111.79GB
111.79GB
] Select [ENTER] Popup
Optimal
Capacity
111.79GB
111.79GB
] Select [ENTER] Popup