Step 1-1: Cpu Installation; Step 1-2: Cpu Cooling Fan Installation - Gigabyte 8VM800M-RZ User Manual

Step 1-1: CPU Installation

Socket
Actuation
Lever

Step 1-2: CPU Cooling Fan Installation

Figure 1.
Pull the rod to the 90-degree directly.
Figure 2.
Locate Pin 1 in the socket and look for a (golden) cut edge on the
CPU upper corner. Insert the CPU into the socket. (Do not force the
CPU into the socket.) Then move the socket lever to the locked
position while holding pressure on the center of the CPU.
Figure 1.
Apply the thermal tape(or grease) to provide better heat conduction
between your CPU and cooling fan.
Figure 2.
Fasten the cooling fan supporting-base onto the CPU socket on the
motherboard.
Figure 3.
Make sure the CPU fan is plugged to the CPU fan connector, than
install completely.
- 9 - Hardware Installation Process