Power Management Setup - Gigabyte 8VM800M-RZ User Manual

Power Management Setup

CMOS Setup Utility-Copyright (C) 1984-2004 Award Software
ACPI Suspend Type
x USB Device Wake-Up From S3
Soft-Off by PWRBTN
AC BACK Function
Keyboard Power On
Mouse Power On
PME Event Wake Up
Modem Ring Resume
Resume by Alarm
x Date (of Month) Alarm
x Time (hh:mm:ss) Alarm
: Move Enter: Select
F5: Previous Values
ACPI Suspend Type
S1(POS)
S3(STR)
USB Device Wake-Up From S3
Disabled
Enable
Soft-Off by PWRBTN
Instant-off
Delay 4 Sec.
AC Back Function
Soft-Off
Memory
Full-On
Keyboard Power On
Disabled
Password
Keyboard 98
Mouse Power On
Disabled
Enabled
PME Event Wake Up
Disabled
Enabled
8VM800M-RZ Motherboard
Power Management Setup
[S1(POS)]
Disabled
[Instant-Off]
[Soft-Off]
[Disabled]
[Disabled]
[Enabled]
[Enabled]
[Disabled]
Everyday
0 : 0 : 0
+/-/PU/PD: Value
F6: Fail-Save Default
Set ACPI suspend type to S1/POS (Power On Suspend). (Default value)
Set ACPI suspend type to S3/STR (Suspend To RAM).
Disable this function. (Default value)
Enable USB device wake up system from S3 suspend type.
Press power button then power off instantly. (Default value)
Press power button 4 seconds to power off. Enter suspend if button is
pressed less than 4 seconds.
Always in off state when AC back. (Default value)
System power on depends on the status before AC lost.
Always power on the system when AC back.
Disabled this function. (Default value)
Enter from 1 to 5 characters to set the keyboard power on password.
If there is a "POWER" button on your keyboard, you can press the key to
power on your system.
Disabled this function. (Default value)
Power on system by mouse event.
Disable this function.
Enable PME as wake up event. (Default value)
- 28 -
Menu Level
[S1]
Set suspend type to
Power On Suspend under
ACPI OS
[S3]
Set suspend type to
Suspend to RAM under
ACPI OS
F10: Save ESC: Exit
F7: Optimized Defaults
Item Help
F1: General Help