Gigabyte 8VM800M-RZ User Manual page 32

DRAM Clock
By SPD
100-DDR200
133-DDR266
166-DDR333
200-DDR400
AGP OverVoltage Control
Increase AGP voltage may get stable for over-clock. But it may damage to AGP card if improper
setting this feature.
Auto
+0.1V
+0.2V
DIMM OverVoltage Control
Increase DIMM voltage may get stable for over-clock. But it may damage to memory module if
improper setting this feature.
Auto
+0.1V
+0.2V
8VM800M-RZ Motherboard
Set DRAM Clock from as DRAM required. (Default value)
Set at "100-DDR200" if you use DDR200 memory module.
Set at "133-DDR266" if you use DDR266 memory module.
Set at "166-DDR333" if you use DDR333 memory module.
Set at "200-DDR400" if you use DDR400 memory module.
Supply AGP voltage as AGP required(1.5V). (Default value)
Increase AGP voltage +0.1V.
Increase AGP voltage +0.2V.
Supply DIMM voltage as memory module required(2.5V). (Default value)
Increase DIMM voltage +0.1V.
Increase DIMM voltage +0.2V.
- 32 -