CONTENTS CONTENTS Contents INTRODUCTION ........................3 DESCRIPTION OF THE CONTROLS..................5 Upper panel ........................5 Setting the washing program and switching on and off ......6 2.2.1 Switching on .......................9 2.2.2 Selecting and starting the program ..............10 2.2.3 End of program ....................... 10 2.2.4 Interrupting a program ..................
INTRODUCTION INTRODUCTION INTRODUCTION Thank you for choosing one of our products. To use this dishwasher correctly and safely, please read this manual carefully. The manual is divided into sections giving you a step-by-step guide to all your appli- ance’s functions. The texts are easy to understand and are complete with detailed illus- trations.
Page 6
INTRODUCTION INTRODUCTION Symbols used in this manual (see tab. 1-01) DANGER. This symbol highlights information and warnings which, if not observed, may compromise personal safety or dam- age the appliance. DANGER OF ELECTROCUTION. This symbol highlights informa- tion and warnings of an electrical nature which, if not observed, may compromise personal safety or damage the appliance.
USER INSTRUCTIONS USER INSTRUCTIONS t l l fi . ) 1 dishwasher can only be switched on, programmed, switched off, etc. with the door open. A brief description (see tab. 2-01) of the various controls on the upper panel is given below.
USER INSTRUCTIONS USER INSTRUCTIONS On/off button Press to power the appliance. Program indicator lights These show which program is selected and whether there are any faults (Troubleshooting). Program selection button Press in sequence to select the required program. Add salt indicator light (only fitted on some models) Shows the appliance has run out salt.
Page 9
USER INSTRUCTIONS USER INSTRUCTIONS a t i lowing table which specifi es the most appropriate type of washing sequence depending on the kind of dishes and how dirty they are (see tabs. 2-02a and 2-02b). LOAD DURATION CONSUMPTION PROGRAMME, PROGRAM DURATION CONSUMPTION LOAD...
Page 10
USER INSTRUCTIONS USER INSTRUCTIONS LOAD DURATION CONSUMPTION PROGRAMME, PROGRAM CROCKERY MINUTES ENERGY NUMBER & SYMBOL PROGRESS WATER AND CUTLERY KWH (1) Pans and dishes await- 3,9 l DURATION CONSUMPTION SOAK LOAD Cold prewash PROGRAMME, PROGRAM ing completion 1,03 gal. CROCKERY MINUTES WATER ENERGY...
USER INSTRUCTIONS USER INSTRUCTIONS Only run the soak program with half loads. To run programmes 6, 7, 8, 9, 10, select the required standard programme and then press the quick time option button (ref. 6 fig. 2-02). After using the above tables to choose the most suitable washing cycle, program the appliance.
USER INSTRUCTIONS USER INSTRUCTIONS program selection button (ref. 3 fi g. 2-02) several times until • the indicator light corresponding to the required program turns on (ref. 2 fi g. 2-02); • if required, press the relative buttons to select any complementary functions (e.g.: “extra drying”, “program delay”;...
USER INSTRUCTIONS USER INSTRUCTIONS • program selection button (ref. 3 fi g. 2-02) for a few seconds until the indi- cator lights of the fourth and fi fth programs turn on (ref. pr. 4, pr. 5 fi g. 2-03). • Close the door again. Auto •...
USER INSTRUCTIONS USER INSTRUCTIONS Auto indi- s t i cator lights of the fourth and fi fth program (ref. pr. 4, pr. 5 fi g. 2-04) fl ash. Turn off the appliance by opening the door and pressing the on/off button (ref. Auto 1 fi...
USER INSTRUCTIONS Additional functions Adjusting the water softener (on some models only) 2.3.1 N.B.: a different washing program from soak must be used to make the following adjustment. Press and hold down the program delay button (ref. 12 fi g. 2-05) until the preset value appears followed by a dot (normally 3.).
Page 16
USER INSTRUCTIONS N.B.: the display indicates the water hardness adjustment and the program delay. A dot (.) after the number means that the water har- dness adjustment is being displayed. If no dot (.) appears, the pro- gram delay is being displayed. Sanitized Auto ½...
USER INSTRUCTIONS USER INSTRUCTIONS RESPECT • Always try to run the dishwasher fully loaded. • Do not wash the dishes under a running tap. • Use the most suitable washing program for each type of load. • Do not pre-rinse. •...
USER INSTRUCTIONS USER INSTRUCTIONS Sanitized Auto ½ QuickTime Sanitized Auto ½ cancella programma QuickTime Auto Sanitized Auto ½ cancella programma QuickTime spegnimento The dishwasher can to signal a number of malfunctions by turning on various Sanitized Auto Auto ½ g i l , s t b i r o l l...
Page 19
spegnimento cancella programma Auto Auto ½ ½ Auto ½ QuickTime QuickTime QuickTime Auto Auto Auto Auto USER INSTRUCTIONS USER INSTRUCTIONS Auto spegnimento cancella programma cancella programma cancella program Auto Auto Auto Auto Auto Auto Auto spegnimento spegnimento spegnimento FAULT DESCRIPTION Auto Auto Auto...
USER INSTRUCTION USER INSTRUCTIONS USER INSTRUCTION OPERATING INSTRUCTIONS OPERATING INSTRUCTIONS BEFORE STARTING TO USE THE APPLIANCE, MAKE SURE YOU HAVE BEFORE STARTING TO USE THE APPLIANCE, MAKE SURE YOU HAVE READ AND UNDERSTOOD ALL THE WARNINGS CONTAINED IN CHAP- READ AND UNDERSTOOD ALL THE WARNINGS CONTAINED IN CHAP- TER 2 “IMPORTANT SAFETY INSTRUCTION”.
Page 21
USER INSTRUCTIONS USER INSTRUCTIONS Fig. 5-02 • When using the dishwasher for the first time, in addition to the salt it is also necessary to add one liter of water to the container. • Each time the salt container is refilled, make sure that the cap (ref. A fig. 5-01) is securely closed.
• adjust the water softening system; USER INSTRUCTIONS • add the regenerating salt; • add the rinse-aid and detergent. Using the rinse-aid and detergent dispensers The detergent and rinse aid dispensers are situated on the inner part of the door: the detergent dispenser (ref.
USER INSTRUCTIONS USER INSTRUCTIONS 5.2.1 Adding the rinse-aid The rinse aid helps the dishes dry faster and prevents the formation of scale deposits and staining; it is automatically added to the water during the final rinse cycle, from the container situated on the inner side of the door. Fig.
USER INSTRUCTIONS USER INSTRUCTIONS • To adjust the rinse aid setting, rotate the dispenser cover (ref. A fig. 5-04) through a quarter turn in an anticlockwise direction and remove it. • Then use a screwdriver to rotate the rinse aid selector to the desired position. •...
Page 25
USER INSTRUCTIONS USER INSTRUCTIONS Fig. 5-06 • When a program with hot prewash is selected (see program table in the “De- scription of Controls” manual), extra detergent must be placed in the cavity (ref. A or B fig. 5-06, depending on models). Only use dishwasher-specific detergents.
USER INSTRUCTIONS USER INSTRUCTION • When using detergent tabs, place them in the cutlery basket. The dispenser has been designed for powder or liquid detergent. As the cover does not open completely d uring the washing cycle, t abs are not f ully released ( dissolved). This could generate the following problems: rinse cycle.
Page 27
USER INSTRUCTIONS USER INSTRUCTION MAKE SURE that the items being washed are dishwasher-safe. Items which are not dishwasher-safe: • Wooden dishes, pots or pans: these may be damaged by the high washing temperatures. • Handcrafted i tems: these a re r arely suitable for washing in a d ishwasher. The relatively high water temperatures and the detergents used may damage them.
USER INSTRUCTIONS USER INSTRUCTION The dishwasher has a capacity of 13 place-settings, including serving dishes. Examples of loading 13 place-settings in the upper rack (see fig. and in the 5-07) lower rack (see fig . 5-08) are shown below. Fig. 5-07 Fig.
USER INSTRUCTIONS USER INSTRUCTION 5.4.1 The lower rack receives the full force of the lower spray arm, and should there- fore be used for the “toughest” items with a heavier degree of soiling. All types and combinations of loads are permitted, provided that the dishes, pots and pans are arranged with all the soiled surfaces exposed to the water jets coming from the bottom.
Page 30
USER INSTRUCTION USER INSTRUCTIONS Loading the lower rack (see fig. 5-10) y l l fl o i t ing them vertically. Pots, pans and their covers must be loaded upside down. When loading soup plates and dessert bowls, be sure to leave a gap between them.
USER INSTRUCTIONS USER INSTRUCTION 5.4.2 (see fig. 5-11/5-12 depending on models) The basket h as removable top grids i nto which items of c utlery s hould be inserted to keep them properly spaced and allow water to pass between them effectively.
USER INSTRUCTIONS USER INSTRUCTION 5.4.3 (see fig. 5-13) Depending on the models, the basket may be equipped with some or all of the following accessories: - Supports f or cups o r long objects (ladles, s poons…), on t he l eft; can b e tipped to the vertical position when not in use.
Page 33
USER INSTRUCTIONS USER INSTRUCTION (see Þ g. 4-14) (see fig. 5-12) 5-14) Load plates facing forward; cups, bowls etc. must always be facing downwar- ds. The left-hand side of the rack can be loaded with two layers of cups and glasses.
Page 34
USER INSTRUCTIONS USER INSTRUCTION Adjusting the upper rack e f f o i t The upper rack can be set in three di erent positions on both sides. The rack must must be level on both sides. be level on both sides. To raise the rack (ref.
USER INSTRUCTIONS USER INSTRUCTION Cleaning the water intake filter Clean the water inlet fil er at regular intervals. After closing the delivery tap, unscrew the ring nut (ref. A fig. 6-01) on the water inlet pipe (using a pair of pliers, if neces- sary) and delicately clean the fil er, removing deposits or impurities.
USER INSTRUCTIONS USER INSTRUCTION 6-04 Cleaning the filter unit • Periodically inspect the filter unit (ref. A fig. 5-04) and, if necessary, clean it 6-05 under running water (at room temperature), using a stiff brush. To remove the filter, grip the tabs, turn anticlockwise and lift upwards; •...
USER INSTRUCTIONS USER INSTRUCTION General warnings and recommendations for correct maintenance • Clean the filters under running water (at room temperature) using a stiff brush. • When removing the filter, take care that there are no food residues on it. If any residues fall into the washing pit (ref. A fig. 5-06), they might block hydraulic components or foul the spray arm nozzles.
WARNINGS WARNINGS IMPORTANT SAFETY INSTRUCTION (Save this instructions) THIS MANUAL FORMS AN INTEGRAL PART OF THE APPLIANCE: IT MUST ALWAYS BE KEPT INTACT TOGETHER WITH THE DISHWASHER. BEFORE USING THE APPLIANCE, CAREFULLY READ ALL THE INSTRUC- TIONS CONTAINED IN THIS MANUAL. INSTALLATION MUST BE PERFORMED BY A QUALIFIED TECHNICIAN, IN COMPLIANCE WITH THE REGULATIONS IN FORCE.
Page 43
WARNINGS WARNINGS BEFORE PROCEEDING WITH INSTALLATION, DISCONNECT THE MAINS POWER SUPPLY FROM THE WORK AREA. DO NOT USE EXTENSION CORDS, ADAPTORS OR SHUNT CONNEC- TIONS IN ORDER TO AVOID THE POSSIBILITY OF OVERHEATING OR BURNING WITH CONSEQUENT FIRE HAZARD. DURING INSTALLATION, TAKE CARE NOT TO INJURE YOURSELF ON THE SHARP EDGES OF THE APPLIANCE;...
Page 44
WARNINGS WARNINGS DO NOT INHALE OR SWALLOW DETERGENT AS THIS MAY CAUSE BURNS AND/OR PERMANENT DAMAGE TO THE NOSE, MOUTH AND THROAT, AND EVEN LEADING TO SUFFOCATION; KEEP DETERGENT AWAY FROM YOUR EYES. IF ONE OF THE ABOVE SITUATIONS OCCURS, SEEK MEDICAL ASSISTANCE IMMEDIATELY.
Page 45
WARNINGS WARNINGS DO NOT INTRODUCE ANIMALS INTO THE DISHWASHER. WHEN OPENING THE DISHWASHER DOOR DURING A CYCLE THERE IS A RISK OF SCALDING DUE TO THE HEAT CONTAINED INSIDE; DO NOT GET IN THE WAY OF THE STEAM LEAVING THE APPLIANCE AND DO NOT TOUCH THE COMPONENTS INSIDE.
Page 46
WARNINGS WARNINGS AQUASTOP MODELS; THE AQUASTOP DEVICE PREVENTS FLOOD- ING IN THE EVENT OF A WATER LEAK. WHEN THE AQUASTOP DEVICE IS TRIPPED (THE ERROR IS INDICATED ON THE DISPLAY), CALL IN A QUALIFIED TECHNICIAN TO IDENTIFY AND REPAIR THE FAULT. IN MODELS EQUIPPED WITH THE AQUASTOP DEVICE, THERE IS A SO- LENOID VALVE INSIDE THE WATER INTAKE HOSE.
Page 47
WARNINGS WARNINGS BY ENSURING THIS PRODUCT IS DISPOSED OF CORRECTLY, YOU WILL HELP PREVENT POTENTIAL NEGATIVE CONSEQUENCES FOR THE EN- VIRONMENT AND HUMAN HEALTH. THE MANUFACTURER DECLINES ALL RESPONSIBILITY FOR DAMAGE TO PERSONS, ANIMALS OR PROPERTY RESULTING FROM FAILURE TO OBSERVE THE ABOVE PRECAUTIONS, FROM TAMPERING WITH EVEN A SINGLE COMPONENT OF THE APPLI- ANCE, OR FROM THE USE OF UNORIGINAL SPARE PARTS.
INSTALLATION INSTRUCTIONS USER INSTRUCTIONS INSTALLATION AND HOOK-UP To install and hook up this appliance, consult the attached installation manual. Bear in mind the following warnings when installing and hooking up the dishwasher. DURING INSTALLATION, TAKE CARE NOT TO INJURE YOURSELF ON THE SHARP EDGES OF THE APPLIANCE;...
Page 49
INSTALLATION INSTRUCTIONS USER INSTRUCTIONS BEFORE MAKING ELECTRICAL CONNECTIONS, DISCONNECT THE MAINS POWER SUPPLY FROM THE WORK AREA. CHECK THAT THE MAINS SUPPLY IN THE PLACE OF INSTALLATION COMPLIES WITH THE REGULATIONS IN FORCE IN THE COUNTRY OF USE, AND THAT IT IS CORRECTLY EARTHED. THIS APPLIANCE MUST BE EARTHED.