Adding The Detergent - Smeg STFABUCR1 Instruction Manual

Hide thumbs Also See for STFABUCR1:
Table of Contents

Advertisement

EN
EN
To adjust the rinse aid setting, rotate the dispenser cover (ref. A fig. 5-04) through
a quarter turn in an anticlockwise direction and remove it.
Then use a screwdriver to rotate the rinse aid selector to the desired position.
Replace the cover (ref. A fig. 5-04) by turning it in a clockwise direction until it is
fully closed.
The amount of rinse aid must be increased if the washed dishes appear dull or
feature circular stains.
If, on the other hand, the dishes are sticky or have white streaks, it is necessary to
reduce the rinse aid setting.
5.2.3
To open the detergent dispenser cover, lightly press the relative button (ref. A fig.
5-05). Add the detergent and close the cover carefully, pushing down on the arrow
(ref. B fig. 5-05). During the washing cycle, the dispenser will be opened automati-
cally.
22
18
USER INSTRUCTIONS
USER INSTRUCTIONS

Adding the detergent

DO NOT INHALE OR SWALLOW DETERGENT AS THIS MAY CAUSE
BURNS AND/OR PERMANENT DAMAGE TO THE NOSE, MOUTH AND
THROAT, AND EVEN LEADING TO SUFFOCATION; KEEP DETERGENT
AWAY FROM YOUR EYES. IF ONE OF THE ABOVE SITUATIONS OCCURS,
SEEK MEDICAL ASSISTANCE IMMEDIATELY.
PREVENT CHILDREN FROM COMING INTO CONTACT WITH DETER-
GENT;
KEEP THEM AWAY FROM THE DISHWASHER WHEN THE DOOR IS
OPEN AS IT MAY CONTAIN DETERGENT RESIDUES. FILL THE DISH-
WASHER JUST BEFORE STARTING THE WASHING CYCLE AND THEN
KEEP THE DETERGENT OUT OF THE REACH OF CHILDREN.
A
Fig. 5-05

Advertisement

Table of Contents
loading

This manual is also suitable for:

StfabupbStfabublStfaburdStfabucr

Table of Contents