Language Settings; Stand-By Settings - Saeco Gran Baristo Avanti HD8967/47 W Series User Manual

Under HARDNESS you can set the water hardness level.
WATER
For water hardness measuring, refer to the "Measuring and Programming
HARDNESS
Water Hardness" chapter.
ENABLE FILTER
ACTIVATE FILTER
Under ENABLE FILTER the machine notifi es the user when the water fi lter
WATER
needs to be replaced.
HARDNESS
ENABLE FILTER
ACTIVATE FILTER
Under ACTIVATE FILTER you activate the fi lter after its installation or
WATER
replacement. Refer to the "INTENZA+ Water Filter Installation" chapter.
HARDNESS
ENABLE FILTER
ACTIVATE FILTER

Language Settings

This setting is important to automatically adjust the machine parameters
according to the user's country.
SETTINGS
WATER
LANGUAGE
STAND-BY TIME
BUTTON SOUND

Stand-by Settings

The STAND-BY sets the time lapse for the machine to go into stand-by
SETTINGS
mode after the last brewing. The stand-by time ranges among 15, 30, 60
WATER
LANGUAGE
and 180 minutes.
STAND-BY TIME
The default time value is 15 minutes.
BUTTON SOUND
OFF: Filter and warning disabled. (Default value) By setting the value
on OFF you disable the fi lter and the replacement warning.
ON: Filter and warning enabled (this warning is automatically set when
the fi lter is activated).
ENGLISH
65 65