Table of Contents
Advertisement
Section 3: Configuration
Authentication
Enter the type of authentication used by your read-only SNMP server.
Type:
Authentication
Enter the authentication password used for your read-only SNMP server.
Password:
Encryption
Enter the encryption password used for your read-only SNMP server.
Password:
Traps:
Enable or disable sending of traps by the camera.
Trap Address:
Enter the IP address of the SNMP server/management station where the trap
messages will be sent.
Traps
Enter a trap community string used by your SNMP server.
Community:
Trap Address 2:
Enter a second IP address of the SNMP server/management station where
trap messages will be sent.
Trap
Enter a second trap community string used by your SNMP server.
Community 2:
D-Link DCS-4602EV User Manual
63
Advertisement
Table of Contents
