D-Link DCS-4602EV-VB1 User Manual page 10

Section 2: Installation
Step 4
Use the screws provided to mount the camera to the wall.
If you are running the camera cables out the side of the camera, guide the camera cables
through the cable channel on the base.
If you are mounting the camera to the ceiling, use a flathead screwdriver to remove the
plastic hole cover from the bottom of the base, then guide the cables through the bottom.
Step 5
Connect the power and Ethernet cables, or just the Ethernet cable if you are using a PoE
connection.
D-Link DCS-4602EV User Manual 10