Related Manuals for D-Link DCS-4602EV-VB1
Summary of Contents for D-Link DCS-4602EV-VB1
- Page 1 Version 2.00 | 03/22/2018 User Manual Vigilance 2 megapixel H.265 Outdoor Dome Camera DCS-4602EV...
- Page 2 Preface D-Link reserves the right to revise this publication and to make changes in the content hereof without obligation to notify any person or organization of such revisions or changes. Information in this document may become obsolete as our services and websites develop and change.
-
Page 3: Table Of Contents
Configuration ............23 Using the Configuration Interface ........23 Live Video ................25 Setup Wizard ................27 Network Setup Wizard ........28 Motion Detection Setup Wizard ........30 Settings ..................33 Network Settings ............33 Camera Settings ..............39 Recording Management ..........48 Advanced Setup ..............60 D-Link DCS-4602EV User Manual... -
Page 4: Product Overview
Quick Installation Guide If any of the above items are missing, please contact your reseller. Safety Notice: Installation and servicing should be done by certified technicians to conform with all local codes and prevent voiding your warranty. D-Link DCS-4602EV User Manual... -
Page 5: Introduction
24 hour surveillance solution with easy clutter-free installation. System Requirements • Computer with Microsoft Windows® 10, 8, or 7 • Internet Explorer 8, Firefox 20, or Chrome or higher • Existing 10/100 Ethernet-based network with an available 802.3af Power over Ethernet (PoE) port D-Link DCS-4602EV User Manual... -
Page 6: Features
Remote Monitoring Utility The D-Link D-ViewCam™ application adds enhanced features and functionality for the camera and allows administrators to configure and access the camera from a separate site via Intranet or Internet. Other features include image monitoring, recording images to a hard drive, viewing up to 32 cameras on one screen, and taking snapshots. -
Page 7: Hardware Overview
Protects the camera lens assembly from the environment. RJ-45 connector for Ethernet which can also be used to power the camera using Power over Ethernet Port Ethernet (PoE). Power Port Connects to an optional 12 V / 1.5 A power adapter (not included). D-Link DCS-4602EV User Manual... - Page 8 IR LEDs Provide illumination for low-light environments. Reset Button Press and hold this button down for 10 seconds to reset the camera to factory default settings. Camera Lens Camera lens to record video of the surrounding area. D-Link DCS-4602EV User Manual...
-
Page 9: Installation
If you are running the camera cables through the wall, drill a hole in the center and pull the cables through the hole. Step 3 Use the included wrench to loosen the 4 screws on the top of the camera, then lift the camera cover off. D-Link DCS-4602EV User Manual... - Page 10 Step 5 Connect the power and Ethernet cables, or just the Ethernet cable if you are using a PoE connection. D-Link DCS-4602EV User Manual...
- Page 11 Note: The camera has a limited range of motion; if it stops when you are adjusting it, do not attempt to rotate or tilt the camera any further in that direction. Step 7 Use the screws provided to mount the camera to the ceiling. Step 8 Re-attach the camera cover. D-Link DCS-4602EV User Manual...
-
Page 12: Using The Dcs-37-1 Mount (Optional)
Use the provided screws to mount the DCS-37-1 to the wall. Step 3 Guide the camera connectors through the back or bottom cable channel on the DCS-37-1. Then screw the mounting plate to the bracket using the set of mounting holes marked B. D-Link DCS-4602EV User Manual... - Page 13 Step 5 Attach the camera cover. If you are passing the camera cables through the wall, place the rubber stopper into the bottom cable channel on the mount to seal it. D-Link DCS-4602EV User Manual...
-
Page 14: Using The Dcs-37-2 Mount (Optional)
Use the provided screws to mount the DCS-37-2 to the wall using the inner mounting holes. Step 3 Guide the camera connectors through the back or side cable channel on the DCS-37-2. Use the provided screws to mount the camera to the DCS-37-2 using the set of mounting holes marked B. D-Link DCS-4602EV User Manual... - Page 15 Step 5 Attach the camera cover. If you are passing the camera cables through the ceiling, place the rubber stopper into the side cable channel to seal it. D-Link DCS-4602EV User Manual...
-
Page 16: Using The Dcs-37-3 Mount (Optional)
Remove the cover and adjust the angle and rotation of the camera as desired, then put the cover back in place. Screw the camera cover back in place. Make sure the rubber stopper is in the side cable channel to seal it. D-Link DCS-4602EV User Manual... -
Page 17: Waterproofing Your Installation
Thread bare Ethernet cable through the waterproof connector as shown, then crimp an RJ-45 plug onto the cable. Step 3 Crimp an RJ-45 connector onto the end of the cable. Step 4 Connect the other end of the Ethernet cable to the camera's Ethernet port. D-Link DCS-4602EV User Manual... - Page 18 Screw the back part of the waterproof connector clockwise until there is a tight seal around the Ethernet cable. If you are using PoE to power your camera, use the power connector cap to seal the power connector. D-Link DCS-4602EV User Manual...
- Page 19 Section 2: Installation If you are using a power adapter (not included) to power your camera, wind waterproof tape around the connection in an overlapping manner to cover it. D-Link DCS-4602EV User Manual...
-
Page 20: Software Installation
Insert the DCS-4602EV CD into your computer's CD-ROM drive to begin the installation. If the Autorun function on your computer is disabled, or if the D-Link Launcher fails to start automatically, click the Start button and type D:\autorun.exe (where D: represents the drive letter of your CD-ROM drive) and press Enter. - Page 21 Click the checkboxes if you wish to change the admin ID and password for the camera, and enter the new ID and password you wish to use. Click Next to continue. D-Link DCS-4602EV User Manual...
- Page 22 Select DHCP if your camera obtains an IP address automatically from a DHCP server such as a router. Select Static IP if you want to manually enter the IP settings for the camera. Click Next to continue. Step 6 Take a moment to confirm your settings and click Restart. D-Link DCS-4602EV User Manual...
-
Page 23: Configuration
Firefox. To log in, use the User name admin and the password you created in the Installation Wizard. If you did not create a password, the default password is blank. After entering your password, click OK. Step 1 Click on the D-Link Setup Wizard SE icon that was created in your Windows Start menu (Start > D-Link > Setup Wizard SE). Step 2 Select the camera and click Link to access the web configuration. - Page 24 After entering a password, click Save. Under Password, enter the same password configured during setup and click Login to continue. Step 4 This section displays your camera’s live video. You can select your video profile and view or operate the camera. D-Link DCS-4602EV User Manual...
-
Page 25: Live Video
This will start recording a video clip to your PC using the storage Record a Video folder you have selected. Click it again to stop recording. If you Clip close the browser window, the recording will stop. D-Link DCS-4602EV User Manual... - Page 26 Alarm received. Record Status This will turn red when the camera is recording. Click this to open a window that describes the Live Video Help controls. Logout Click this to log out of the web interface. D-Link DCS-4602EV User Manual...
-
Page 27: Setup Wizard
Click on this button to start the Network Setup Wizard. Refer to "Network Wizard: Setup Wizard" on page 28. Motion Click on this button to start the Motion Detection Setup Wizard. Refer to Detection "Motion Detection Setup Wizard" on page 30. Setup Wizard: D-Link DCS-4602EV User Manual... -
Page 28: Network Setup Wizard
Enter the correct configuration information and click Next to continue. If you are using PPPoE, select PPPoE and enter your user name and password. • Click Next to continue. D-Link DCS-4602EV User Manual... - Page 29 Set the correct time to ensure that all events will be triggered as scheduled. Click Next to continue. Step 5: Confirm the settings are correct and click Finish to save them. The settings will be saved to the DCS-4602EV and the camera will restart. D-Link DCS-4602EV User Manual...
-
Page 30: Motion Detection Setup Wizard
Click Next to continue. Step 2 This step allows you to enable motion detection based on a customized schedule. Specify the day and hours. You may also choose to always record whenever motion is detected. Click Next to continue. D-Link DCS-4602EV User Manual... - Page 31 Step 3 This step allows you to specify where to send the snapshot/video clip/system log when motion is detected. Select E-mail, FTP, Network Storage, or SD Card, and enter the relevant information. Click Next to continue. D-Link DCS-4602EV User Manual...
- Page 32 Section 3: Configuration Step 4 You have completed the Motion Detection Wizard. Please verify your settings and click Finish to save them. Please wait a few moments while the camera saves your settings and restarts. D-Link DCS-4602EV User Manual...
-
Page 33: Settings
Invalid gateway settings may cause the failure of transmissions to a different subnet. Primary DNS: Enter the primary domain name server for translating domain names to IP addresses. Secondary Enter the secondary domain name server for translating domain names to DNS: IP addresses. D-Link DCS-4602EV User Manual... - Page 34 User Name / Enter the username and password for your PPPoE account. Re-enter your Password: password in the Confirm Password field. You may obtain this information from your ISP. PPPoE Status: This shows your current PPPoE connection status. D-Link DCS-4602EV User Manual...
- Page 35 Use this section to configure the HTTP and HTTPS access settings for your camera. After making any changes, click the Save button to save your changes. HTTP Stream Enable or disable stream authentication. Authentication: HTTP Port: The default port number is 80. Access Name The default name is video#.mjpg, where # is the number of the stream. for Stream 1~3: D-Link DCS-4602EV User Manual...
- Page 36 ƒ Create a certificate request and install Status: Displays the status of the certificate. Note: The certificate cannot be removed while the HTTPS is still enabled. To remove the certificate, you must first uncheck HTTPS secure connection. D-Link DCS-4602EV User Manual...
- Page 37 The DCS-4602EV allows you to multicast each of the available streams via Stream 1/2: a group address and specify the TTL value for each stream. Enter the port and TTL settings you wish to use if you do not want to use the defaults. D-Link DCS-4602EV User Manual...
- Page 38 Use this section to enable Bonjour, which allows your camera to be accessed more easily on your network. After making any changes, click the Save button to save your changes. Bonjour: Enable this to enable Bonjour support. Bonjour Name: Enter a name to identify this camera on Bonjour. D-Link DCS-4602EV User Manual...
-
Page 39: Camera Settings
Use this section to configure the device name and LED behavior for your camera. After making any changes, click the Save button to save your changes. IP Camera Create a unique name for your camera that will be added to the file name Name: prefix when creating a snapshot or a video clip. D-Link DCS-4602EV User Manual... - Page 40 This setting controls the amount of noise reduction that will be applied to the picture. 3D Denoise: This setting controls the amount of 3D denoise that will be applied to the picture. 3D denoise reduces the amount of image noise when viewing a low- light environment. D-Link DCS-4602EV User Manual...
- Page 41 Specify a value from 0 to 10 to specify how much WDR adjustment to apply to the image, or select None. Reset: Click this button to reset the image to factory default settings. D-Link DCS-4602EV User Manual...
- Page 42 Adjust this setting to alter the color intensity/strength. Saturation: This setting controls the amount of coloration, from grayscale to fully saturated. Sharpness: Specify a value from 0 to 100 to specify how much sharpening to apply to the image. D-Link DCS-4602EV User Manual...
- Page 43 Set Day/Night mode using the schedule set in the drop-down boxes. The Mode: camera will enter Day mode at the starting time and return to Night mode at the ending time. Activate the Disable IR LED to set Day mode for the set times. D-Link DCS-4602EV User Manual...
- Page 44 You can delete the window by clicking the Delete button. The Privacy Mask setting allows you to define up to 3 rectangular areas on the camera's image to be blocked/excluded from recordings and snapshots. D-Link DCS-4602EV User Manual...
- Page 45 ƒ CBR - Constant Bit Rate will use a fixed bit rate that you set. ƒ CVBR - Constrained Variable Bit Rate works like VBR, but lets you set a maximum bit rate. D-Link DCS-4602EV User Manual...
- Page 46 H.264 and H.265, as MJPEG uses the full image for every frame. A general rule of thumb is the lower that number, the better the image but the higher the bandwidth and storage requirements. D-Link DCS-4602EV User Manual...
- Page 47 You can also set how many seconds the camera will stay at each position by setting the Dwell Time for each preset. D-Link DCS-4602EV User Manual...
-
Page 48: Recording Management
• Video Clip • System Log • Server (can be any pre-selected Action media such as snapshot, video clip, or system log) When an event is triggered: Server 1: E-mail Event Action Server 2: SD Card D-Link DCS-4602EV User Manual... - Page 49 2. To delete the selected item from the server, media, event, or recording drop-down menus, click the Delete button next to it. 3. Click on the name of an item to edit it. D-Link DCS-4602EV User Manual...
- Page 50 If you want to use an inserted microSD card for your server, select this. Before you set up this option please make sure your HDD has enough space, and it is better to not save other files in the same folder as recording files. D-Link DCS-4602EV User Manual...
- Page 51 9 images are generated after a trigger is activated. 1 pic. 2 pic. 3 pic. 4 pic. 5 pic. 6 pic. 7 pic. 8 pic. 9 pic. The moment the trigger is activated. D-Link DCS-4602EV User Manual...
- Page 52 This is the prefix that will be added to the filename of saved video clips. Prefix: Camera log: Select this option to set the media type to system logs. This will save the event to the camera system log, but will not record any snapshots or video. D-Link DCS-4602EV User Manual...
- Page 53 Selecting this will trigger an event when the camera's connection to the network is lost. Tamper Selecting this will trigger an event when tampering has been detected. For Detection: more details, refer to "Tamper" on page 59. D-Link DCS-4602EV User Manual...
- Page 54 Select the actions you want the camera to take when the event happens. Select the Server to use, then choose the Media you want to save to it. Please note that you need to set up your Server and Media entries first. D-Link DCS-4602EV User Manual...
- Page 55 If this is selected, files will be based on the maximum length you specify. Each File for Recording: File Name The prefix name will be added to the beginning of the file name of the Prefix: recording file(s). D-Link DCS-4602EV User Manual...
- Page 56 Click this button to automatically format the microSD card and create the Video and Picture folders. Deleting Files To delete files and folders, click on the checkbox next to the files or folders and Folders: you want to delete, then click the OK button. D-Link DCS-4602EV User Manual...
- Page 57 Low sensitivities may be useful when monitoring an area that has flickering lights or a window to the outside in view. High sensitivities may be useful when monitoring an area that rarely changes, such as a storeroom or warehouse. D-Link DCS-4602EV User Manual...
- Page 58 Save to save your changes. To modify an existing motion detection box, click on the button next to the window's number, then move and resize it as you wish. You can delete the window by clicking the Delete button. D-Link DCS-4602EV User Manual...
- Page 59 Enable this to use tamper detection. Detection: Trigger Enter the tamper trigger duration in seconds. The tamper alarm will be Duration: triggered only when there is a substantial change in the camera's view for longer than the trigger duration specified. D-Link DCS-4602EV User Manual...
-
Page 60: Advanced Setup
UPnP capable network. Forwarding: Forwarding If UPnP Port Forwarding is enabled, you can set which port to use for Port: forwarding. Forwarding If UPnP Port Forwarding is enabled, this will show the UPnP Port Forwarding Status: status. D-Link DCS-4602EV User Manual... - Page 61 Timeout: You can set up how often the camera notifies the DDNS service of its current global IP address by entering a whole number in hours. Status: This shows the current status of your DDNS updates. D-Link DCS-4602EV User Manual...
- Page 62 Enter the authentication password used for your read/write SNMP server. Password: Encryption Enter the encryption password used for your read/write SNMP server. Password: Read Only Enter a name for the read-only community of your read-only SNMP server. Security Name: D-Link DCS-4602EV User Manual...
- Page 63 Enter a trap community string used by your SNMP server. Community: Trap Address 2: Enter a second IP address of the SNMP server/management station where trap messages will be sent. Trap Enter a second trap community string used by your SNMP server. Community 2: D-Link DCS-4602EV User Manual...
- Page 64 QoS, the router's settings will override the QoS settings of the camera. To use CoS, enable it and set the priority for your Live Video, Live Audio, Event/Alarm, and Management camera traffic. D-Link DCS-4602EV User Manual...
- Page 65 Delete Deny Select an entry to remove from the Deny List, then click Delete. List: Note: All addresses in the Deny List will be denied access, even if they are also in the Allow List. D-Link DCS-4602EV User Manual...
-
Page 66: Camera Configuration
You may save your current camera configuration as a file on your computer. Hard Drive: Load From Locate a pre-saved configuration by clicking Browse and then restore the Local Hard pre-defined settings to your camera by clicking Upload. Drive: D-Link DCS-4602EV User Manual... - Page 67 Enabling this option will allow you to keep your network settings when Setting: resetting your camera to the factory defaults. Restore You may reset your camera and restore the factory settings by clicking to Factory Restore. Default: D-Link DCS-4602EV User Manual...
- Page 68 This will restart your camera. Schedule If you want your camera to reboot on a regular schedule, enable this Reboot: option, then select the days and time you want the camera to reboot on and click the Save button. D-Link DCS-4602EV User Manual...
- Page 69 Section 3: Configuration Firmware Update Here you can update the camera's firmware. The current version of the firmware is shown next to the D-Link logo at the top of the page. File Path: To update the firmware, select a firmware file to use from your hard drive by clicking Browse..., then click the Upload button.
-
Page 70: Camera Options
Section 3: Configuration Camera Options Camera Info This page displays detailed information about your camera, the services running on your camera, and active video streams. D-Link DCS-4602EV User Manual... -
Page 71: Time
Enter the offset that should be used when Daylight Saving is being used. Start Time: Set the date and time that Daylight Saving should start. End Time: Set the date and time that Daylight Saving should end. D-Link DCS-4602EV User Manual... - Page 72 This section lets you set your camera's date and time automatically by using an NTP server. NTP Server: Enable this option to set your camera's time using an NTP server, then select an NTP server to use from the drop-down box. D-Link DCS-4602EV User Manual...
- Page 73 Set Date and This option allows you to set the time and date manually. Time Manually: Copy your PC’s It will synchronize the time information from your PC time: D-Link DCS-4602EV User Manual...
-
Page 74: Administration Settings
Section 3: Configuration Administration Settings Admin Password Here, you may modify the administrator’s password for your camera. New Password Set a new password for the administrator’s account. / Retype Password: D-Link DCS-4602EV User Manual... - Page 75 Here, you may add user accounts for accessing the camera. User accounts are allowed to access the Live Video page, but cannot access any of the camera's configuration pages. User Name: Enter a user name for the user you wish to create. New Password Enter a password for the user you wish to create. / Retype Password: D-Link DCS-4602EV User Manual...
- Page 76 If you want to change a user's password, select a user from the drop-down box, enter the new password, then click the Modify button. If you want to remove a user from the user list, select a user from the drop- down box, then click the Delete button. D-Link DCS-4602EV User Manual...
-
Page 77: Camera Log
Section 3: Configuration Camera Log This page displays the log information of your camera. You may download the information by clicking Download. You may also click Clear to delete the saved log information. D-Link DCS-4602EV User Manual... -
Page 78: Technical Specifications
• PPPoE • UDP • UPnP port forwarding • ICMP • RTP/RTSP/RTCP • DHCP client • IP filtering • NTP client (D-Link) • CoS • DNS client • QoS • DDNS client (D-Link) • Multicast • SMTP client • SNMP •... - Page 79 • Operating: -30 to 50 °C (-22 to 122 °F) • Storage: -20 to 70 °C (-4 to 158 °F) Humidity • Operating: 20% to 80% non-condensing • Storage: 5% to 95% non-condensing Certifications • CE • FCC • CE LVD • C-Tick D-Link DCS-4602EV User Manual...
- Page 80 Appendix A: Technical Specifications Dimensions D-Link DCS-4602EV User Manual...
- Page 81 • Metal • Polycarbonate • DCS-4602EV Camera Models Supported • DCS-4602EV • DCS-4602EV • DCS-4603 • DCS-4603 • DCS-4603 • DCS-4633EV • DCS-4633EV • DCS-4633EV • DCS-4802E • DCS-4802E • DCS-4802E • DCS-6212L • DCS-6212L • DCS-6212L D-Link DCS-4602EV User Manual...
-
Page 82: Regulatory Information
Cet appareil numérique de la classe A est conforme à la norme NMB-003 du Canada. European Union CE EMI Class A Warning This equipment is compliant with Class A of CISPR 32. In a residential environment this equipment may cause radio interference. D-Link DCS-4602EV User Manual... - Page 83 • Halten Sie das Produkt von Heizkörpern und anderen Quellen fern, die Wärme erzeugen. • Trennen Sie das Produkt immer von der Stromzufuhr, bevor Sie es reinigen und verwenden Sie dazu ausschließlich ein trockenes fusselfreies Tuch. D-Link DCS-4602EV User Manual...
- Page 84 • Mantenga el producto alejado de los radiadores y de otras fuentes de calor. • Desenchufe siempre el producto de la alimentación de red antes de limpiarlo y utilice solo un paño seco sin pelusa. D-Link DCS-4602EV User Manual...
- Page 85 • Houd het product uit de buurt van radiators en andere warmtebronnen. • U dient het product steeds los te koppelen van de stroom voordat u het reinigt en gebruik uitsluitend een droge pluisvrije doek. D-Link DCS-4602EV User Manual...
- Page 86 D-Link designs and builds its products to be as environmentally friendly as possible, by using recyclable, low toxic materials in both products and packaging. D-Link recommends that you always switch off or unplug your D-Link products when they are not in use. By doing so you will help to save energy and reduce CO2 emissions.
- Page 87 D-Link et l’environnement Chez D-Link, nous sommes conscients de l'impact de nos opérations et produits sur l'environnement et nous engageons à le réduire. Pour limiter cet impact, D-Link conçoit et fabrique ses produits de manière aussi écologique que possible, en utilisant des matériaux recyclables et faiblement toxiques, tant dans ses produits que ses emballages.
- Page 88 D-Link zijn producten zo milieuvriendelijk mogelijk, door het gebruik van recycleerbare producten met lage toxiciteit in product en verpakking. D-Link raadt aan om steeds uw D-Link producten uit te schakelen of uit de stekker te halen wanneer u ze niet gebruikt. Door dit te doen bespaart u energie en beperkt u de CO2-emissies.
- Page 89 D-Link a životní prostředí Ve společnosti D-Link jsme si vědomi vlivu našich provozů a výrobků na životní prostředí a snažíme se o minimalizaci těchto vlivů. Proto své výrobky navrhujeme a vyrábíme tak, aby byly co nejekologičtější, a ve výrobcích i obalech používáme recyklovatelné a nízkotoxické materiály.
- Page 90 D-Link produkter som er så miljøvennlig som mulig, ved å bruke resirkulerbare, lav-toksiske materialer både i produktene og forpakningen. D-Link anbefaler at du alltid slår av eller frakobler D-Link-produkter når de ikke er i bruk. Ved å gjøre dette hjelper du å spare energi og å redusere CO2-utslipp.
- Page 91 D-Link sine produkter, så de er så miljøvenlige som muligt, ved at bruge genanvendelige materialer med lavt giftighedsniveau i både produkter og emballage. D-Link anbefaler, at du altid slukker eller frakobler dine D-Link-produkter, når de ikke er i brug. Ved at gøre det bidrager du til at spare energi og reducere CO2-udledningerne.
- Page 92 D-Link och miljön På D-Link förstår vi och är fast beslutna att minska den påverkan våra verksamheter och produkter kan ha på miljön. För att minska denna påverkan utformar och bygger D-Link sina produkter för att de ska vara så miljövänliga som möjligt, genom att använda återvinningsbara material med låg gifthalt i både produkter och förpackningar.