Table of Contents
Advertisement
Section 3: Configuration
In this section, you may configure the video image settings for your camera. All changes in the Image Settings section will be made immediately.
For the other sections, after making any changes, click the Save button to save your changes.
Image
Mirror:
This will mirror the image horizontally.
Flip:
This will flip the image vertically. When turning Flip on, you may want to
consider turning Mirror on as well.
Anti-Flicker:
Select the frequency used by your power lines to avoid interference or
distortion.
White Balance:
Use the drop-down box to change white balance settings to help balance
colors for different environments. You can choose from Auto, Outdoor,
Indoor, Fluorescent, and Push Hold. If you choose Push Hold, hold a white
card or grey card in front of the camera, then click the Save button to set the
camera's white balance.
Exposure
Changes the exposure mode. Use the drop-down box to set the camera for
Mode:
Indoor, Outdoor, or Night environments, or to Moving to capture moving
objects. The Low Noise option will focus on creating a high-quality picture
without noise. You can also create 3 different custom exposure modes. Max
Gain will limit the brightness of the exposure.
Denoise:
This setting controls the amount of noise reduction that will be applied to
the picture.
3D Denoise:
This setting controls the amount of 3D denoise that will be applied to the
picture. 3D denoise reduces the amount of image noise when viewing a low-
light environment.
D-Link DCS-4602EV User Manual
Image Settings
40
Advertisement
Table of Contents
