Installing The Software; Auto-Run Program; Quick Install - Gestetner F104 Supplementary Manual

Installing the Software

NIC FAX comes with a CD-ROM con-
taining the driver and utilities for
LAN-Fax and Network Delivery
Scanner functions.
Note
❒ This manual assumes users al-
ready have a working knowledge
of Windows operating systems.
Refer to the relevant Windows
manual for specific details of Win-
dows functions and operations.

Auto-run Program

When the CD-ROM is loaded, the in-
staller starts automatically (auto-run),
allowing easy installation.
Note
❒ To install NIC FAX Driver and
Utilities on a Windows NT 4.0,
Windows 2000, or Windows XP
system, you have to be in an Ad-
ministrators group.
❒ Depending on Windows settings,
the auto-run program may not
start. In such cases, double-click
"SETUP.EXE" (located in the CD-
ROM's root directory).
❒ If you do not want to start the auto-
run program, hold down the shift
key until your computer loads the
CD-ROM and access is complete.
❒ If you click [Cancel] before installa-
tion is complete, the process stops.
Restart the installer to complete in-
stallation.
❒ Screen displays shown in the pro-
cedure below may differ depend-
ing on versions of Windows, and
environment settings.

Quick Install

You can install software easily, using
the CD-ROM provided. By simply
pressing Quick Install, the following
are installed:
• LAN-Fax Driver
(Settings for the TCP/IP port are
also made.)
• Address Book
• LAN-Fax Cover Sheet Editor
• SmartNetMonitor for Client
Note
❒ If you have already installed
SmartNetMonitor for Client, the
LAN-Fax function will be ready af-
ter installing LAN-Fax Driver. See
p.47 "LAN-Fax Driver".
A A A A
Before beginning
exit all other applications.
B B B B
Insert the CD-ROM that contains
NIC FAX Driver and Utilities into
the CD drive on your computer.
The Select Language dialog box
appears.
C C C C
Select the language you want, and
then click [OK].
The install program starts.
Installing the Software
installation,
45
2