sprint
Use the "sprint" command to make
settings for IEEE 1394 (SCSI print).
❖ ❖ ❖ ❖ View settings
IEEE 1394 (SCSI print) settings are
displayed.
msh> sprint
❖ ❖ ❖ ❖ Bidirectional configuration for IEEE
1394 (SCSI print)
Use this setting to set IEEE 1394
(SCSI print) bidirectional.
The default is "on".
msh> sprint bidi {on | off}
status
The printer status can be checked us-
ing the following command:
❖ ❖ ❖ ❖ Messages
msh> status
Reference
For details, see p.107 "Current
Printer Status"
Remote Maintenance by telnet
syslog
Use the "syslog" command to display
the information stored in the printer's
system log.
❖ ❖ ❖ ❖ View message
msh> syslog
Reference
For details about the information
displayed, see p.123 "System Log
Information".
upnp
Use the "upnp" command to display
and configure the universal plug and
play.
❖ ❖ ❖ ❖ Public URL display
msh> upnp url
❖ ❖ ❖ ❖ Public URL configuration
msh> upnp "url string"
• Enter the URL string in the char-
acter string.
4
101