Mac Os X; Installing The Ppd Files; Setting Up The Ppd File - Gestetner DSm651 Supplement Manual

Mac OS Configuration

Mac OS X

This section explains how to configure a Mac OS X to use EtherTalk, USB and
TCP/IP.
Follow the procedure below to configure Mac OS X 10.1. If you are not using
Mac OS X 10.1, see the manual of the Mac OS X you are using for details.
2
Important
❒ For Mac OS X 10.1 or higher.
Note
❒ The PPD files are stored in the following folder on the CD-ROM.
Mac OS X:PPD Installer

Installing the PPD Files

Follow the procedure below to install a PPD file to print from Mac OS X.
Important
❒ You need an administrator name and a password (phrase). For details, con-
sult your network administrator.
A A A A
Insert the CD-ROM into the CD-ROM drive.
B B B B
Double-click the CD-ROM drive icon.
C C C C
Double-click the [Mac OS X] folder.
D D D D
Double-click the installer icon.
E E E E
Follow the instructions on the screen.

Setting Up the PPD File

A A A A
Start Print Center.
B B B B
Click [Add Printer].
Click [AppleTalk] on the first pop-up menu.
If the zone is set, select the zone from the second pop-up menu.
C C C C
Select the PPD file for the model you are using from the [Printer Model:] pop-
up menu, and then click [Add].
64