USING THE RESET & ADMIN MENU
You can use the TV's RESET & ADMIN menu to restore the TV to its factory
default settings as well as access other system settings.
Using the RESET & ADMIN, you can:
•
Reset the TV to factory settings
Reset & Admin
•
Force the system to power off and on
Reset to Factory Defaults
•
Create a system pin code to lock
content and picture settings
Soft Power Cycle
•
Enable or disable program offers and
Power Indicator
suggestions
System PIN Code
•
Enable or disable anonymous debug
USB Power
data for system performance.
Viewing Data
•
Start or stop the Store Demo Mode
VIZIO Privacy Policy
Store Demo
Restoring the TV to Factory Default Settings
All of the on-screen menu settings can be reset to the factory defaults.
If you restore the TV to the factory default settings, all
changes you have made to the settings will be lost! This
includes any wireless or picture settings
Back
To restore the TV to its factory default settings:
1. Press the Menu button on the remote. The on-screen menu is
displayed.
On
2. Use the Arrow buttons on the remote to highlight System and press
OK. The SYSTEM menu is displayed.
Always On
3. Highlight Reset & Admin and press OK. The RESET & ADMIN menu is
displayed.
4. Highlight Reset to Factory Defaults and press OK. If you have
changed the set system PIN, enter it now.
The TV displays, "Select Reset to restore all TV settings to factory
defaults and clear all account information."
5. Highlight Reset and press OK.
6. Wait for the TV to turn off. The TV will turn back on shortly afterward
and the setup process will begin.
Performing a Soft Power Cycle
A soft power cycle forces the TV to turn off then on again.
1. Press the Menu button on the remote. The on-screen menu is
displayed.
2. Use the Arrow buttons on the remote to highlight System and press
OK. The SYSTEM menu is displayed.
3. Highlight Reset & Admin and press OK. The RESET & ADMIN menu is
displayed.
4. Highlight Soft Power Cycle and press OK."
5. Highlight Yes and press OK.
6. The TV will turn off then on again
Turning the Power Indicator On or Off
The Power Indicator on the front of your TV normally does not glow
when the TV is on. You can change this setting if you prefer the light to
be on.
To turn the Power Indicator Light On or Off:
1. Press the Menu button on the remote. The on-screen menu is
displayed.
2. Use the Arrow buttons on the remote to highlight System and press
OK. The System menu is displayed.
3. Use the Arrow buttons on the remote to highlight Reset & Admin
and press OK. The Reset & Admin menu is displayed.
4. Highlight Power Indicator and press OK.
5. Use the Left/Right Arrow buttons to select On or Off.
3
34