Page 2
And congratulations on your new VIZIO TV. dropped. Your TV is designed and manufactured to operate within defined design To get the most out of your new VIZIO product, read these instructions limits. Misuse may result in electric shock or fire. To prevent your TV •...
Page 3
• Only power of the marked voltage can be used for your TV. Any other • If any of the following occurs, contact the dealer: • Ensuring the television set is not overhanging the edge of the voltage than the specified voltage may cause fire or electric shock. - The power cord fails or frays.
Page 4
TELEVISION ANTENNA CONNECTION PROTECTION If an outside antenna/satellite dish or cable system is to be connected to the TV, make sure that the antenna or cable system is electrically grounded to provide some protection against voltage surges and static charges. Article 810 of the National Electrical Code, ANSI/NFPSA 70, provides Ground Clamp information with regard to proper grounding of the mast and supporting...
Page 5
For DTS patents, see http://patents.dts.com. For DTS patents, see http://patents.dts.com. Manufactured under license from DTS, Inc. DTS, the Symbol, Manufactured under license from DTS, Inc. DTS, the Symbol, DTS and the Symbol together, and DTS Studio Sound are DTS and the Symbol together, and DTS Studio Sound II are registered trademarks and/or trademarks of DTS, Inc.
Table Of Contents Getting to Know Your TV ..........Setting the Auto Power Off Feature ..........27 SmartCast Home ............40 Setting Up Channels ................28 Front Panel ..................7 What is SmartCast Home? ...............40 Scanning for Channels ..............28 Rear Panel ...................8 What You Can Do with SmartCast Home ........40 Skipping Channels ................28 Connecting Your Devices ..............11 How to Launch SmartCast Home ...........40...
Getting to Know Your TV FRONT PANEL Remote Sensor and Power Indicator When using the remote, aim it directly at this sensor. The power indicator flashes on when the TV turns on, then goes out after several seconds. To keep the power indicator on as long as the TV is on, see Turning the Power Indicator On or Off.
Rear Panel - D24h-G9 HDMI - Connect an HDMI device. Composite - Connect a composite. Video/ L/R Coaxial - Connect to a coaxial cable from cable, satellite, or antenna. Stereo Audio Out - Connect 3.5 mm audio device, such as a headset or sound bar. USB - Connect a USB thumb drive to play photo, music, or video.
Page 9
Rear Panel - D40f-G9 HDMI - Connect an HDMI device. Component/Composite - Connect a component or composite. Audio Out - Connect to an RCA device, such as sound bar. Coaxial - Connect to a coaxial cable from cable, satellite, or antenna. USB - Connect a USB thumb drive to play photo, music, or video.
Page 10
Rear Panel - D32h-G9, D50x-G9, V405-G9, V505-G9 & V655-G9 HDMI - Connect an HDMI device. Composite - Connect a composite device. Audio Out - Connect to an RCA device, such as sound bar. Coaxial - Connect to a coaxial cable from cable, satellite, or antenna.
Connecting Your Devices CONNECTING A DEVICE - AUDIO & VIDEO CABLE TYPES Your TV can be used to display output from most devices. 1. Verify that your device has a video port that matches an available port on the TV (HDMI, Component, etc.). 2.
Page 12
CONNECTING A DEVICE - D24h-G9 ONLY D24h-G9 includes a Composite In / AV In port that requires additional adapters (not included). 1. Connect the appropriate cable (not included) to the TV and the device using an adapter (not included). 2. Turn the TV and your device on. Set the TV’s input to match the connection you used (Composite). Composite Connection Connecting to a composite device on Your Device...
Page 13
CONNECTING A DEVICE - AUDIO CABLE TYPES Your TV can be output sound to an audio device, such as a receiver or sound bar. 1. Verify that your device has audio port that matches an available port on the TV (Optical, RCA, etc). 2.
TV, ask someone to help you. Note: The image shown here is for illustrative purposes only and may be subject to change. The actual number of ports and their locations may vary, depending on the model. D24h-G9 D32h-G9 D40f-G9 D50x-G9 V405-G9...
16. Last - Return to the channel last viewed properly dispose of your batteries consistent with the laws and/or regulations where you live. For more information please visit: www.vizio.com/environment 17. Number Pad - Manually enter a channel WARNING: keep the remote control batteries away from 18.
Your use of this device and software functionality are covered by VIZIO and Google ‘s respective Terms of Service and Privacy Policies. By pressing “Accept All”, you agree to be bound by the (i) VIZIO Terms of Service and Privacy Policy and (ii) the Google Terms of Service and Privacy Policy.
Using the On-Screen Menu CHANGING THE INPUT SOURCE Your TV features an easy-to-use on-screen menu. NAVIGATING THE ON-SCREEN MENU To open the on-screen menu, press the Menu button on the remote. INPUT External devices, such as DVD players, Blu-ray Players, and video game To open the on-screen menu: consoles, can be connected to your TV.
CHANGING THE SCREEN ASPECT RATIO To change the screen aspect ratio: Some programs have black bars on the top or sides of the picture so that the picture keeps its original shape. Examples include widescreen movies and 1. Press the Wide button on the remote.
ADJUSTING THE PICTURE SETTINGS 4. To manually change each of the picture settings, use the Up/ Adjusting More Picture Settings Down Arrow buttons on the remote to highlight that picture To adjust more picture settings: setting, then use the Left/Right Arrow buttons to adjust the Your TV can be adjusted to suit your preferences and viewing conditions.
Adjusting the Color Temperature Adjusting the Picture Mode Edit Settings Saving a Custom Picture Mode Adjusting the color temperature changes the white balance of the Picture Mode Edit Settings allow you to make precise adjustments to the Custom picture modes allow you to save a group of custom settings for picture.
Locking/Unlocking a Custom Picture Mode Deleting a Custom Picture Mode Custom picture modes can be locked/unlocked with a unique PIN to Custom picture modes that are no longer needed can be deleted. prevent accidental changes to their settings. To lock all custom picture modes: Inputs assigned to a deleted custom picture mode become assigned to the Calibrated picture mode.
Adjusting the Color Tuner Settings To turn color channels off and on: To show or hide the SMPTE Test Pattern: The Color Tuner settings allow you to adjust the HSB color and 11 point 1. From the COLOR CALIBRATION menu, use the Arrow buttons to 1.
Page 23
To show or hide the Ramp Test Pattern: To show or hide the Uniformity Analyzer Test Pattern: 1. From the Color Tuner menu, use the Arrow buttons to highlight 1. From the Color Tuner menu, use the Arrow buttons to highlight Calibration Tests, and then press the Left/Right Arrow buttons until Calibration Test, and then press the Left/Right Arrow buttons until the RAMP TEST PATTERN menu is displayed.
ADJUSTING THE AUDIO SETTINGS • Lip Sync - Adjusts the synchronization between the display image and the accompanying audio track. To adjust the audio settings: • Digital Audio Out - Changes the type of processing for digital audio out and HDMI ARC output when connected to a home theater audio 1.
MAC address in the router’s settings. To find the TV’s MAC address: high-speed Wireless-N. D24h-G9 , D32h-G9 and D40f-G9 support 1. From the NETWORK menu, highlight Manual Setup and press OK. The Wireless-N. D50x-G9, V405-G9, V505-G9 and V655-G9 support Wireless-AC.
Page 26
Connecting to a Hidden Network Testing Your Network Connection To connect to a wireless network whose network name (SSID) is not being To test your network connection: broadcast: 1. From the NETWORK menu, highlight Test Connection and press OK. 1. From the NETWORK menu, highlight 2.
SETTING TIMERS Setting the Auto Power Off Feature Using the Blank Screen Feature To help save energy, your TV is set by default to turn off after 10 minutes To help save LED life, your TV screen can turn on or off while audio is without a video or audio signal.
SETTING UP CHANNELS Scanning for Channels Skipping Channels The TV may need to scan for channels before it can display programs After a channel scan is completed, you may find that some channels are You can use the TV’s Channels menu to: and their associated information.
LISTENING TO ALTERNATE AUDIO To use the Digital Language feature: 1. From the CHANNELS menu, highlight Digital Audio and press OK. Changing the Analog Audio Language Digital Audio Back The DIGITAL LANGUAGE menu is Some analog over-the-air (free) and cable channels broadcast programs displayed.
USING PARENTAL CONTROLS Enabling or Disabling Program Ratings Blocking and Unblocking Content by Rating To manage program content according to its rating, you must enable the A channel may sometimes broadcast programs that are meant for The TV’s parental controls allow you to prevent the TV from displaying Program Rating feature.
SETTING UP CLOSED CAPTIONING Changing the Appearance of Digital Closed Captions Digital closed captions can be displayed according to your preference. Your TV can display closed captions for programs that include them. See the diagram on the next page for an explanation of the parts of the Closed captions display a transcription of a program’s dialogue.
Page 32
Typical choices include: Text Background • Opaque background, transparent window—Only a strip of background appears behind the text, expanding as the text appears. This is the typical "As Broadcast" mode. • Opaque background and window in the same color—When text appears, the entire line fills with color at once.
RENAMING DEVICES ON THE INPUT MENU You can rename the inputs to make them easier to recognize on the Input Name Input menu. For example, if you have a DVD player connected to the Component input, you can rename that input to display “DVD Player.” See Changing the Input Source.
CHANGING THE TV SETTINGS Checking for System Updates Changing the On-Screen Menu Language To check for a system update: Your TV can display the on-screen menu in Using the SYSTEM menu, you can: different languages. 1. Press the Menu button on the remote. The on-screen Menu is •...
HDMI (ARC) input with the included remote, without any programming. Mode setting uses less than 0.5W of power. Quick Start Mode enables Using CEC, your VIZIO TV remote can control: your Display to power on faster. 1. Press the Menu button on the •...
VIZIO is committed to providing intuitive, user-friendly products. Your have in your home. TV across multiple devices . new VIZIO TV offers several accessibility features that can help you get the most out of it. To edit your TV name:...
• Start or stop the Store Demo Mode 4. Highlight Reset to Factory Defaults and press OK. If you have VIZIO Privacy Policy changed the set system PIN, enter it now. Store Demo The TV displays, “Select Reset to restore all TV settings to factory defaults and clear all account information.”...
Page 38
6. Highlight and select Save to confirm. find useful, both on the VIZIO TV/display and other devices sharing your IP Address. Viewing Data is also used to help content publishers, broadcasters...
USING THE INFO WINDOW The Info Window can be displayed by pressing the Info button on the remote: • Press the Info button one time to display the TV name, current input, picture mode, network name, and time. Current Input Picture Mode Network Name Living Room...
Launch top tier apps directly from the home screen. Discover • Unlock your photos and videos by mirroring your laptop or mobile device onto your TV. • Turn your iOS or Android device into the ultimate streaming companion with the VIZIO SmartCast INPUT Mobile app. MENU EXIT •...
WatchFree™ What is WatchFree™? VIZIO WatchFree takes your cord-cutting entertainment experience one step further! With the simple press of a button, enjoy free streaming TV with over 100 live TV channels to choose from – news, movies, sports, comedy, music and more. A built-in on-screen guide makes finding something to watch easier than ever.
Playing USB Media Preparing Your USB Drive to Play USB Media Removing the USB Drive from the TV The USB Media Player allows you to connect a USB thumb drive to your To display USB media, you must first save your videos onto a USB thumb To safely remove your USB drive from the TV: TV and play music, video, or photos.
Page 43
Now Playing Information displays song title, album title, and artist name. Back Button Album Art Highlight this button and Progress Bar If included on the USB thumb drive and press OK to return to the displays the duration of the currently-playing song. associated with your music, the album art will previous screen.
Page 44
Back Button Highlight this button and press OK to return to the previous screen. Video Connected Sources USB1: MyFlashDrive displays connected USB MyFlashDrive\Video\root\My Videos devices. Date Duration File Family Vacation - California 00:23:43 Current Folder 26th Birthday Party 00:38:18 My Videos Japan 2017 00:41:08 Aby’s Graduation...
Page 45
Back Button Back Button Highlight this button Highlight and press OK to return to left column. and press OK to return to the previous screen. Current Folder Displays the folder path. Photo VIZIO_2GB\Photo\root Connected Sources USB1: displays connected USB devices. Folder Contents This area displays the contents of the Current Folder...
Phone: (877) 698-4946 (TOLL-FREE) Or text VIZIO support using your mobile device: Text Message: (205) 301-3729 Note: This number accepts SMS/MMS messages only. No voice calls accepted. Message and data rates may apply. Only available in the U.S.
Page 47
Customized Support Get assistance quickly with your information on-hand. News & Offers Take advantage of the latest news and special offers from VIZIO. Safety & Satisfaction Stay up to date with important product updates and notifications. REGISTER YOUR VIZIO PRODUCT NOW...
Page 48
• Ensure the TV is plugged into a working electrical outlet. capabilities. This up-converting can sometimes cause irregularities in • Select a pre-set picture mode. See Adjusting the Picture Settings. VIZIO • Ensure the power cable is securely attached to the TV.
Page 49
• Make sure the VIZIO SmartCast • Press the MENU button on your remote and select the System option. • Mobile™ app is installed on your phone or tablet. Open the VIZIO Select Reset & Admin. Then select Viewing Data to turn the feature on SmartCast Mobile™...
Specifications D24h-G9 D32h-G9 D40f-G9 D50x-G9 Size 24” 32” 40” 50” Viewable Area 23.5” 31.5” 39.5” 49.5” MOUNTING 21.83” x 14.78” x 6.18” 28.64” x 18.97” x 7.04” 35.51” x 22.59” x 8.36” 44.13” x 28.00” x 10.07” Dimensions w/ Stand (554.5 x 375.4 x 157.0 mm)
Page 51
Specifications V405-G9 V505-G9 V655-G9 Size 40” 50” 65” Viewable Area 39.5” 49.5” 64.5” MOUNTING 35.51” x 22.70” x 8.36” 44.13” x 28.00” x 10.07” 57.37” x 35.61” x 11.95” Dimensions w/ Stand (902.0 x 576.5 x 212.4 mm) (1120.9 x 711.2 x 255.8 mm) (1457.2 x 904.6 x 303.5 mm) 35.51”...
Regulatory Information FCC Class B Radio Interference Statement Notice CPC-2-1-28 d’Industrie Canada, License optionnelle pour les appareils NOTE: This equipment has been tested and found to comply with the The changes or modifications not expressly approved by the party radio de faible puissance, pour plus de détails. limits for a Class B digital device, pursuant to Part 15 of the FCC Rules.
WITHIN THIRTY (30) DAYS OF THE DATE OF PURCHASE, RETURN IT FOR A product in its original packaging or in packaging that affords an equal VIZIO, and if you are a resident of the United States, you must submit REFUND TO THE AUTHORIZED RETAILER WHERE YOU PURCHASED IT.
Page 54
Arbitration Act, and may be entered in any court having jurisdiction. TO YOU. Except as may be required by law, neither you nor VIZIO nor an arbitrator IN LIEU OF ANY OTHER REMEDY FOR ANY AND ALL LOSSES AND may disclose the existence, content, or results of any arbitration under DAMAGES RESULTING FROM ANY CAUSE WHATSOEVER (INCLUDING this warranty without the prior written consent of you and VIZIO.