Table of Contents
Advertisement
ADJUSTING THE PICTURE SETTINGS
Your TV can be adjusted to suit your preferences and viewing conditions.
If you save changes to the settings for a picture mode, an asterisk
appears after its name (see Saving a Custom Picture Mode ).
To adjust the picture settings:
1. Press the Menu button on the remote. The on-screen menu is
displayed.
2. Use the Arrow buttons on the remote to highlight Picture and press
OK. The Picture menu is displayed.
3. Use the Arrow buttons on the remote to highlight Picture Mode,
then use the Left/Right Arrow buttons to change the picture mode:
•
Standard mode sets the picture settings to the
default settings.
•
Calibrated mode sets the picture settings to values ideal for
watching TV in a brightly-lit room.
•
Calibrated Dark mode sets the picture settings to values ideal for
watching TV in a dark room.
•
Vivid mode sets the picture settings to values that produce a
brighter, more vivid picture.
•
Game mode reduces throughput delays and optimizes the picture
settings for displaying game console output.
•
Computer mode optimizes the picture settings for displaying
computer output.
4. To manually change each of the picture settings, use the Up/
Down Arrow buttons on the remote to highlight that picture
setting, then use the Left/Right Arrow buttons to adjust the
setting:
•
Backlight - Adjusts the LED
brightness to affect the overall
brilliance of the picture. Backlight
cannot be adjusted when starting
Picture
from some picture modes.
Picture Mode
•
Brightness - Adjusts the black
Backlight
level of the picture. When this
Brightness
setting is too low, the picture may
be too dark to distinguish details.
Contrast
When this setting is too high,
Color
the picture may appear faded or
Tint
washed out.
Sharpness
•
Contrast - Adjusts the white
More Picture
level of the picture. When this
setting is too low, the picture may
Picture Mode Edit
appear dark. When this setting is
Color Calibration
too high, the picture may appear
faded or washed out. If the setting
is too high or too low, detail may
be difficult to distinguish in dark
or bright areas of the picture.
•
Color - Adjusts the intensity of the
picture colors.
•
Tint - Adjusts the hue of the picture. This setting is useful in
adjusting the flesh tones in the picture. If flesh appears too
orange, reduce the level of color before adjusting tint.
•
Sharpness - Adjusts the edge sharpness of picture elements.
It can be used to sharpen non-HD (high definition) content;
however, it will not produce detail that does not otherwise exist.
When you have finished adjusting the picture settings, press the Exit
button on the remote.
Adjusting More Picture Settings
To adjust more picture settings:
1. From the PICTURE menu, use the
Arrow buttons to highlight More
Picture, and then press OK.
2. Use the Arrow buttons to highlight
the setting you wish to adjust, then
Back
press the Left/Right Arrow buttons to
change the setting:
Calibrated
90
•
Color Temperature - See Adjusting
the Color Temperature.
50
•
Black Detail - Adjusts the average
50
brightness of the picture to
50
compensate for large areas of
0
brightness. Select Off, Low, Medium,
20
or High.
•
Backlight Control - When ON, it
will improve the contrast ratio of
the picture by adjusting backlight
zones. Specific adjustments are based
on content.
•
Reduce Noise:
- Reduce Signal Noise - Diminishes artifacts in the image caused by
the digitizing of image motion content. Select Off, Low, Medium, or
High.
- Reduce Block Noise - Reduces pixelation and distortion for mpeg
files. Select Off, Low, Medium, or High.
•
Game Low Latency - Select On to reduce video delay (lag)
when gaming.
•
Film Mode - Optimizes the picture for watching film. Select Auto
or Off.
•
Color Space – Select color space for the source. Video sources use
YCbCr, but PC uses RGB. Available for HDMI input only.
•
Gamma - Set the shape of the Gamma curve. Use lower Gamma
values for bright room conditions, and higher values when it's dark.
3. When you have finished adjusting More Picture Settings, press the Exit
button on the remote.
3
More Picture
Back
Color Temperature
Normal
Black Detail
Off
Backlight Control
On
Reduce Noise
Game Low Latency
Off
Film Mode
On
Color Space
Auto
Gamma
2.2
16
Advertisement
Table of Contents
