Using The Admin & Privacy Menu; Performing A Reboot; Viewing System Information; Accessing The Support Code - Vizio M Quantum X Series User Manual

USING THE ADMIN & PRIVACY MENU
You can use the TV's Admin & Privacy menu to restore the TV to its factory default
settings as well as access other administrative settings.
Using the ADMIN & PRIVACY menu, you can:
• Force the system to power off and on
Admin & Privacy
• View system information
Reboot TV
• View a customer service support code
System Information
• Check for system updates
Support Code
Check for Updates
• Reset the TV to factory settings
Reset to Factory Settings
• Enable or disable viewing data
Viewing Data
• Personalize advertising choices
Advertising
VIZIO Privacy Policy
• View the VIZIO Privacy Policy
Store Demo
• Start or stop the store demo mode

Performing a Reboot

A reboot forces the TV to turn off then on again.
Menu > Admin & Privacy > Reboot TV

Viewing System Information

To view technical data and status information about your TV and network
connection:
Menu > Admin & Privacy > System Information

Accessing the Support Code

On
Retrieve a customer service support code/PIN or access basic TV information to
assist in a customer service interaction.
To retrieve your support code:
Off
Menu > Admin & Privacy > Support Code

Checking for System Updates

To check for a system update:
Menu > Admin & Privacy > Check for Updates
If an update is found, the TV will ask to confirm the update. If no update is found, the
screen will note "The TV is up-to-date."

Resetting the TV to Factory Default Settings

All of the on-screen menu settings can be reset to the factory defaults.
WARNING: If you reset the TV to the factory default settings, all
change you have made to the settings will be lost. This includes
any wireless or picture settings.
To reset the TV to its factory default settings:
Menu > Admin & Privacy > Reset to Factory Settings
1. If you set a system PIN code, enter it now.
2. The TV displays, "Select Reset to restore all TV settings to factory defaults."
3. Highlight Reset and press OK.
4. Wait for the TV to turn off. The TV will turn back on shortly afterward and the
setup process will begin.
TIP: You can also reset the TV to default setting by press and
holding (12 seconds) the power/input button located under the
remote sensor. See Power/Input Button on page 7 .
32