Setting Up Channels; Scanning For Channels; Skipping Channels - Vizio V605-G3 User Manual

Hide thumbs Also See for V605-G3:
Table of Contents

Advertisement

SETTING UP CHANNELS

You can use the TV's Channels menu to:
Find Channels
Channels
Select channels to skip
Find Channels
Select Analog Audio mode
Skip Channels
Select the language for Digital Audio
Analog Audio
Set Parental Controls
Digital Audio
Parental Control

Scanning for Channels

The TV may need to scan for channels before it can display programs
and their associated information. A channel scan is required for free
over-the-air channels (using an antenna) and cable channels from an out-
of-the-wall connection (without a cable box). Moving the TV to an area
Back
with different channels requires the TV to scan for channels again.
To perform an Auto Channel Scan:
Stereo
1. From the CHANNELS menu,
highlight Find Channels, and press
English
OK. The auto channel scan begins.
2. Wait until the channel scan is 100%
complete. Highlight Done and press
OK.
3. Press the Exit button on the remote.
If the channel scan is canceled, the
channels that were already discovered
are retained. A new channel scan will
clear all channels.

Skipping Channels

After a channel scan is completed, you may find that some channels are
too weak to watch comfortably. There may also be some channels you do
not want to view. You can remove these channels from the TV's memory
with the Skip Channel feature.
Channels that have been removed with the Skip Channel
feature can still be viewed if the channel is entered using the
Number Pad. If you wish to completely block a channel from
Find Channels
Back
being viewed, use the parental controls. See Locking and
Unlocking Channels .
Channels Found
Digitial : 8
To remove a channel:
Analog: 12
1. From the CHANNELS menu, highlight
45% Complete
Skip Channel, and press OK. The
SKIP CHANNEL menu is displayed.
Cancel
2. For each channel you wish to remove,
use the Up/Down Arrow buttons on
the remote to highlight the channel
and press OK. A
right of each channel you select.
3. When you have selected all of the
channels you wish to remove, press
the Exit button on the remote.
3
Skip Channels
Back
0
Test 0
1
Test 1
P
appears to the
2
Test 2
3
Test 3
4
Test 4
25

Advertisement

Table of Contents
loading

This manual is also suitable for:

V705-g3

Table of Contents