Adjusting The Network Settings - Vizio D32h-G9 User Manual

ADJUSTING THE NETWORK SETTINGS

Your TV is Internet-ready, featuring both an Ethernet port and built-in
high-speed Wireless-N. D24h-G9 , D32h-G9 and D40f-G9 support
Wireless-N. D50x-G9, V405-G9, V505-G9 and V655-G9 support Wireless-AC.
If your TV is connected to a network with an Ethernet cable,
you will not see the wireless network connection menu. You
must unplug the Ethernet cable to set a wireless network
connection
Connecting to a Wireless Network
To connect to a wireless network whose
network name (SSID) is being broadcast: Network
1. Press the Menu button on the remote.
Wired Connection
The on-screen menu is displayed.
Wireless Access Points
2. Use the Arrow buttons on the remote
to highlight Network and press OK.
The NETWORK menu is displayed.
3. If you do not see your wireless network
displayed, highlight More Access
Points and press OK. The WIRELESS Manual Setup
ACCESS POINTS menu, which is a
Hidden Networks
list of available wireless networks, is
Test Connection
displayed.
4. Highlight the name of your wireless
network (this is the network's SSID)
and press OK.
5. Using the on-screeen keyboard,
enter your network's password, then
highlight Connect and press OK.
6. Press the Exit button on the remote.
Changing the Manual Setup Settings
Advanced users can fine-tune the network settings using the Manual Setup
feature.
To change advanced network settings:
1. From the NETWORK menu, highlight
Manual Setup and press OK. The
MANUAL SETUP menu is displayed.
2. To change the settings manually, use
the Arrow buttons on the remote to
highlight DHCP and then use the Left/
Right Arrow buttons to change the
setting to Off.
3. Use the Arrow and OK buttons to adjust
each setting:
Back
• IP Address - The IP address assigned to
Disconnected
the TV.
• Subnet Mask - The subnet Exit 2D
• Default Gateway - Your network's
default gateway address.
• Pref. DNS Server - Your preferred
domain name server address.
• Alt. DNS Server - Your alternate domain
name server address.
4. Use the Arrow buttons on the remote to highlight Save and press OK.
5. Press the Exit button on the remote.
Finding MAC Addresses for Network Setup
The security settings on your router may require you to enter the TV's
MAC address in the router's settings. To find the TV's MAC address:
1. From the NETWORK menu, highlight Manual Setup and press OK. The
MANUAL SETUP menu is displayed.
Manual Setup
Back
2. Find the MAC address for the TV at the bottom of the list. The MAC
addresses for the connections in use are displayed:
DHCP Off
• RJ45 MAC - The Ethernet or RJ45 MAC address may be needed to set
IP Adress __. __.__.__
up your network when you have connected the TV to your network
Subnet Mask __. __.__.__
when you have connected the TV to your network with an Ethernet
Defult Gateway __. __.__.__
(Cat 5) cable.
Pref. DNS Server __. __.__.__
• Wireless MAC - The Wireless (WiFi) MAC address may be needed to
Alt DNS Server __. __.__.__
connect your TV to your network with WiFi.
RJ45 Mac 0:0:0:0:0:0
Wireless Mac 0:0:0:0:0:0
Save
Cancel
3
25