Adjusting The Network Settings - Vizio Quantum M556-H1 User Manual

ADJUSTING THE NETWORK SETTINGS

Your TV is Internet-ready, featuring both an Ethernet port and built-in high-speed
wireless internet.
TIP: If your TV is connected to a network with an Ethernet cable,
you will not see the wireless network connection menu. You must
unplug the Ethernet cable to set a wireless network connection.
Connecting to a Wireless Network
Network
To connect to a wireless network whose
network name (SSID) is being broadcast:
Wired Connection
Menu > Network >
Wireless Access Points
Choose your network >
Enter in the password > Connect
Manual Setup
Hidden Networks
Test Connection
To forget a saved network:
Highlight a saved wireless access point > OK
If you do not see your wireless network displayed, click on:
More Access Points > Highlight your wireless network
the password > Connect
Changing the Manual Setup Settings
Advanced users can fine-tune the network settings using the Manual Setup feature.
The security settings on your router may require you to enter the TV's MAC address.
To change advanced network settings:
Menu > Network >
DHCP > Off
1. Use the Navigation and OK buttons to
adjust each setting:
Disconnected • IP Address — The IP address assigned to
the TV.
• Subnet Mask — The subnet Exit 2D.
Default Gateway — Your network's default
•
gateway address.
• Pref . DNS Server — Your preferred domain
name server address.
• Alt . DNS Server — Your alternate domain
name server address.
2. Use the Navigation buttons on the remote to highlight Save and press OK.
To find the TV's MAC address:
Menu > Network >
> Forget
You can find your TV's MAC address at the bottom of the list. The MAC addresses for
the connections in use are displayed:
RJ45 MAC — The Ethernet or RJ45 MAC address may be needed to set up
•
your network when you have connected the TV to your network when you have
> Enter in
connected the TV to your network with an Ethernet (Cat 5) cable.
• Wireless MAC — The Wireless (Wi-Fi) MAC address may be needed to connect
your TV to your network with Wi-Fi.
Manual Setup >
Manual Setup
DHCP Disconnected
IP Address __. __.__.__
Subnet Mask __. __.__.__
Default Gateway __. __.__.__
Pref. DNS Server __. __.__.__
Alt DNS Server __. __.__.__
RJ45 Mac 0:0:0:0:0:0
Wireless Mac 0:0:0:0:0:0
Manual Setup
Connecting to a Hidden Network
To connect to a wireless network whose network name (SSID) is not being broadcast:
Menu > Network > Hidden Network > Enter the Access Point
Name > Connect > Enter in the password
Enter Access Point Name
Testing Your Network Connection
Enter your access point name. This is used
To test your network connection:
to connect to an access point with a hidden
SSID.
Menu > Network > Test Connection
3
15