Adjusting The Network Settings - Vizio V435M-K04 User Manual

ADJUSTING THE NETWORK SETTINGS

Your TV is Internet-ready, featuring both an Ethernet port and built-in high-speed
wireless internet.
TIP: If your TV is connected to a network with an Ethernet cable,
you will not see the wireless network connection menu. You must
unplug the Ethernet cable to set a wireless network connection.
Connecting to a Wireless Network
Network
To connect to a wireless network whose
network name (SSID) is being broadcast:
Wired Connection
Menu > Network >
Wireless Access Points
Choose your network >
Enter in the password > Connect
Test Connection
Hidden Networks
Manual Setup
Network Information
To forget a saved network:
Highlight a saved wireless access point > OK
If you do not see your wireless network displayed, click on:
More Access Points > Highlight your wireless network
the password > Connect
Testing Your Network Connection
To test your network connection:
Menu > Network >
Connecting to a Hidden Network
To connect to a wireless network whose
network name (SSID) is not being broadcast:
Menu > Network >
> Enter the Access Point Name
Connect > Enter in the password
Changing the Manual Setup Settings
Disconnected Advanced users can fine-tune the network
settings using the Manual Setup feature. The
security settings on your router may require
you to enter the TV's MAC address.
To change advanced network settings:
Menu > Network >
1. Use the Navigation and OK buttons to adjust each setting:
• IP Address — The IP address assigned to the TV.
Subnet Mask — The subnet address.
•
• Default Gateway — Your network's default gateway address.
• Pref . DNS Server — Your preferred domain name server address.
• Alt . DNS Server — Your alternate domain name server address.
Use the Navigation buttons on the remote to highlight Save and press OK.
> Forget 2.
> Enter in
Test Connection
Enter Access Point Name
Enter your access point name. This is used
to connect to an access point with a hidden
SSID.
Hidden Network
>
Manual Setup > DHCP > Off
To find the TV's MAC address:
Manual Setup
Menu > Network > Manual Setup
DHCP
You can find your TV's MAC address at the
bottom of the list. The MAC addresses for the
IP Address
connections in use are displayed:
Subnet Mask
Default Gateway
RJ45 MAC — The Ethernet or RJ45 MAC
•
address may be needed to set up your
Pref. DNS Server
network when you have connected the TV
Alt DNS Server
to your network when you have connected
RJ45 Mac
the TV to your network with an Ethernet
Wireless Mac
(Cat 5) cable.
Wireless MAC — The Wireless (Wi-Fi) MAC
•
address may be needed to connect your TV
to your network with Wi-Fi.
To view network information
Menu > Network > Network Information
Off
__. __.__.__
__. __.__.__
__. __.__.__
__. __.__.__
__. __.__.__
0:0:0:0:0:0
0:0:0:0:0:0
22