Adjusting The Color Tuner Settings - Vizio D32h-G9 User Manual

Adjusting the Color Tuner Settings

The Color Tuner settings allow you to adjust the HSB color and 11 point
white balance, turn color channels off for testing, and display color bar,
flat, and ramp test patterns.
The Color Tuner, 11 Point White Balance, and test patterns
allow technicians to manually calibrate the TV. Calibration
requires specialized training, an input with precisely set
colors, and a specialized light meter.
To adjust the HSB color settings:
1. From the COLOR CALIBRATION menu, use the Arrow buttons to
highlight Color Tuner, and then press OK. The Color Tuner menu is
displayed.
Color Tuner
Red Green Blue Cyan
Hue 0 0 0 0
Saturation -1 5 -4 0
Brightness -24 0 -22 0
Offset 0 0 0
Gain 0 0 0
2. Use the Arrow buttons on the remote to highlight the Hue,
Saturation, Brightness, Offset, or Gain of the color you wish to adjust.
Press the OK button.
3. Use the Left/Right Arrow buttons to adjust the value. When you are
finished press the OK button to save the setting.
4. When you have finished adjusting the color tuner settings, press the
Exit button.
To turn color channels off and on:
1. From the COLOR CALIBRATION menu, use the Arrow buttons to
highlight Color Tuner, and then press OK. The COLOR TUNER menu
is displayed.
Red
Hue 0
Saturation -1
Brightness -24
Offset 0
Gain 0
2. Use the Arrow buttons on the remote to highlight Red, Green, or
Blue.
3. Press the OK button to turn the color channel off or on. An X
appears over a color channel that has been turned off.
Magenta Yellow
4. Use the Arrow buttons to highlight another color channel to turn off
25 -14
or on. Only two color channels can be turned off at the same time.
-2 0
0 0 5. When you have finished with the color channels, press the Exit
button.
To adjust the 11 Point White Balance settings:
1. From the Color Tuner menu, use the Arrow buttons to highlight
Color Tuner, and then press the Left/Right Arrow buttons until the
11 POINT WHITE BALANCE menu is displayed.
Gain
5%
2. Use the Arrow buttons on the remote to highlight the Gain and
Color values you wish to adjust. Press the OK button and use the
Left/Right Arrow buttons to adjust the value. When you are finished,
press the OK button to save the setting.
3. When you have finished, press the Exit button.
Color Tuner
Green Blue Cyan Magenta Yellow
0 0 0 25 -14
5 -4 0 -2 0
0 -22 0 0 0
0 0
0 0
11 Point White Balance
Red Green Blue
0 0 0
To show or hide the SMPTE Test Pattern:
1. From the Color Tuner menu, use the Arrow buttons to highlight
Calibration Tests, and then press the Left/Right Arrow buttons
until the SMPTE TEST PATTERN menu is displayed.
SMPT Test Pattern
Off
2. Use the Arrow buttons on the remote to highlight Off. Use the Left/
Right Arrow buttons to highlight On to show the SMPTE Pattern.
—or—
To hide the SMPTE Test Pattern, use the Left/Right Arrow buttons to
highlight Off.
3. When you are finished, press the Exit button.
To show or hide the Flat Test Pattern:
1. From the Color Tuner menu, use the Arrow buttons to highlight
Calibration Tests, and then press the Left/Right Arrow buttons until
the FLAT TEST PATTERN menu is displayed.
Flat Test Pattern
Off
2. Use the Arrow buttons on the remote to highlight Off. Use the Left/
Right Arrow buttons to select the percentage brightness for the
flat test pattern. Selecting a percentage immediately shows the flat
pattern at that brightness.
—or—
To disable the Flat Test Pattern, use the Left/Right Arrow buttons to
highlight Off.
3. When you are finished, press the Exit button.
3
22