Adjusting The Audio Settings - Vizio D32h-G9 User Manual

ADJUSTING THE AUDIO SETTINGS

To adjust the audio settings:
1. Press the Menu button on the
remote. The on-screen menu
Audio
is displayed.
2. Use the Arrow buttons on the remote
Speakers
to highlight Audio and press OK. The
Volume Control Display
Audio menu is displayed.
Surround Sound
3. Use the Arrow buttons to highlight
Volume Leveling
the setting you wish to adjust, then
Balance
press Left/Right Arrow buttons to
change the setting: Lip Sync
Digital Audio Out
• Speakers - Turns the built-in speakers
On or Off.
Analog Audio Out
• Volume Control Display - Toggle
between On or Off to hide or display
the on-screen volume slider that
appears when volume is adjusted.
• Surround Sound - Surround sound
uses DTS TruSurround™ to deliver
an immersive surround sound
experience from the TV's internal
speakers. TruSurround completes
the entertainment experience by providing deep, rich bass and by
delivering crisp details and clear, intelligible dialog. Select On or Off.
• Volume Leveling - Volume leveling uses DTS TruVolume™ to
maintain consistent volume levels during transitions between
program content, AV formats, and input sources. Select On or Off.
In a few cases, volume leveling may artificially suppress volume
increases, making it difficult to hear dialog or flattening sudden
noises. If this occurs, turn volume leveling off.
When the TV speakers are set to On, DTS signals cannot be
passed through digital audio outputs.
• Balance - Adjusts the loudness of the audio output from the left and
right speakers.
• Lip Sync - Adjusts the synchronization between the display image
and the accompanying audio track.
• Digital Audio Out - Changes the type of processing for digital audio
out and HDMI ARC output when connected to a home theater audio
system. Select Auto, PCM, Dolby D or Bitstream.
Back
Auto
You must select Bitstream for audio with more than two
On channels (3.0, 5.0, or 5.1, for example).
On
On
• Analog Audio Out - Sets the volume control properties for the RCA
0
connector when connected to a home theater audio system. Select
0
Variable if you are controlling the volume with the TV's volume
Auto
controls, or select Fixed if an external audio device (sound bar or AV
receiver) will control the volume.
Fixed
4. When you have finished adjusting the audio settings, press the Exit
button on the remote.
3
24