Table of Contents
Advertisement
❖ ❖ ❖ ❖ When one of the following messages is displayed on the guidance display
Guidance Display
RE-ENTER COPY NUMBER MAXIMUM
IS XXX
RE-ENTER COPY NUMBER MINIMUM
IS XXX
SET THE ORIGINALS
INPUT YOUR ID CODE
NO ADDITIONAL PRINTS ALLOWED
MASTER MAKING HALTED
-
-
-
- When a service code (E-XX) is displayed in the guidance display
Turn the main switch off and on. If a service code appears again, contact your
service representative.
Note
❒ If a service code appears on the guidance display after you turn the main
switch off and on a few times, do not continue turning it on and off. Leave the
machine off.
❒ E04 might be displayed when you make masters continuously using the orig-
inals that have solid images. In the case, turn off the main switch and wait for
a while.
If Your Machine does not Operate as You Want
Meaning
The maximum number of prints that can be entered
is specified by User Tools. Change the number of
prints.
The minimum number of prints that can be entered
is specified by User Tools. Change the number of
prints.
Make prints after you confirm whether there is an
original.
User Code mode is set. Before printing, enter your
user code.
Security mode is set. If you make the next master,
Security mode is canceled.
Master making is halted.
Press the { { { { Master Making} } } } key.
5
93
DRAFT 2002/08/02
Advertisement
Table of Contents
