PEN SETTINGS
• Fill
The "Fill" option allows you to set the pen attributes for all 16
pens simultaneously. To do this, first set the pen widths, the pen
color and the gray scale value and then click once on "Fill":
Calcomp - Colors
To assign the required gray scale value to each individual color,
open the "Color" tab:
The change to the percentage figure is made directly using the
keyboard. Quit the window with "OK" and your changes will be
saved. If you do not wish to save your changes, quit the window
with "Cancel" or "ESC".
In this window you can change the gray scale value, which has
been assigned to each color. If you do not want to change each
color, you can set all pens to "Gray" on the "Pens" tab and then
set the individual gray values for each pen.
56
RW-470 CLIENTS