Clean Passages; Clean Impingement Ports - Graco Fusion CS 312666F Manual

Clean Passages

If necessary, clean out passages in fluid hous-
ing and handle with drill bits. All drill bits are
available in an accessory kit. Order kit 256526
for ClearShot Handle Drill Kit; see Accesso-
ries, page 57.
312666F

Clean Impingement Ports

1. Follow Pressure Relief Procedure, page
17.
2. Disconnect air (D) and remove fluid mani-
fold (M).
M
F . 40
IG
3. Flush Gun, page 26. If gun will not flush,
see Mix Chamber and Side Seal Assem-
blies, page 38.
4. Remove Front End, page 36.
Maintenance
D
TI11330a
29