Shutdown - Graco Fusion CS 312666F Manual

Shutdown

Shutdown
Overnight Shutdown
1. Follow Pressure Relief Procedure, page
17.
2. Leave air turned on and gun detriggered.
Grease gun daily to prevent two-compo-
nent curing and keep fluid passages clean.
Purge air carries grease mist through air
chamber (AC), impingement ports (IP),
and out mix chamber nozzle (N), coating
all surfaces. Use Graco 117773 grease.
IP
N
F . 15
IG
16
AC 14
TI12124a
3. Unscrew and remove front cover retainer
(C). Remove front cover (U).
4. Using grease gun, dispense a half shot of
grease into fitting (G). Do not over-grease;
use a half shot maximum.
G
N
U
C
F . 16
IG
5. Replace front cover (U) and front cover
retainer (C).
Always leave a ClearShot Liquid cartridge
in gun handle to prevent cartridge bore
contamination.
W
TI11335a
312666F