Table of Contents
Advertisement
B.) Attach the Front Post (#9) to the Main Frame (#1) and secure it with four M8 x ⅝" Allen Bolts (#19).
C.) Attach the Left & Right Front Post Floor Cap (#8L/R) to Front Post. Secure each Cap with two ST5
x ¾" Self Tapping Screws (#10).
STEP-5
A.) Flip down the Front Post (#9) to floor.
B.) Pull out Lock Pin (#35) and flip down the Rowing Rail (#45) to floor.
C.) Adjust the two Rear Leverage Knobs (#55) to stabilize the Rear Support (#54) on floor.
STEP-6
A.) Plug the Left & Right Rowing Bar Holder (#11L/R) into the Front Post.
B.) Attach the Left Pedal (#14L) to the pivot on Main Frame (#1). Secure it with two M12 x 5 ½"
Socket Head Allen Bolt (#13). Repeat the same step to install Right Pedal (#14R).
© IMPEX INC.
9
www.impex-fitness.com
Advertisement
Table of Contents
