Dell EMC E39S Series Installation And Service Manual page 119

Figure 61. Removing the expansion card from expansion card riser 2
Figure 62. Removing the expansion card from expansion card riser 3
Next steps
1. Install expansion card into the expansion card
2. If you are removing the card permanently, install a metal filler bracket over the empty expansion slot opening and push the expansion
card latch.
NOTE: You must install a filler bracket over an empty expansion card slot to maintain Federal Communications
Commission (FCC) certification of the system. The brackets also keep dust and dirt out of the system and aid in
proper cooling and airflow inside the system.
riser.
Installing and removing system components 119