Making Advanced Network Settings - Epson WF-2861 User Manual

User's Guide
Note:
You can check the connection method on the Web site. To access the Web site, scan the QR code displayed on the
printer's control panel using the smart device or enter the URL (http://epson.sn) on the computer, and then go to Setup.
6. Enter the password displayed on the printer's control panel on the computer or smart device.
7. After the connection is established, tap OK on the printer's control panel.
8. Close the Network Connection Settingsscreen.
Related Information
"Checking the Network Connection Status" on page 30
&
"When You Cannot Make Network Settings" on page 191
&

Making Advanced Network Settings

You can change the network device name, TCP/IP setup, proxy server and so on. Check your network environment
before making changes.
1. Select Settings on the home screen.
2. Select General Settings > Network Settings > Advanced.
3. Select the menu item for settings, and then select or specify the setting values.
Related Information
"Setting Items for Advanced Network Settings" on page 29
&
Setting Items for Advanced Network Settings
Select the menu item for settings, and then select or specify the setting values.
❏ Device Name
You can enter the following characters.
❏ Character limits: 2 to 15 (you must enter at least 2 characters)
❏ Usable characters: A to Z, a to z, 0 to 9, -.
❏ Characters you cannot use at the top: 0 to 9, -.
❏ Characters you cannot use at the bottom: -
Network Settings
29