Kyocera ECOSYS M6235cidn Operation Manual page 327

Setup and Registration (System Menu) > System Menu
Item
Sleep Rules (models for
Europe)
Sleep Timer
EnergySaver RecoveryLevel
Weekly Timer Settings
Weekly Timer
Schedule
Retry Times
Retry Interval
*1 Displayed when the optional Card Authentication Kit is activated.
Select whether to use the Sleep mode for the following functions individually:
*1
• Card Reader
• Application
Value: Off, On
NOTE
If the sleep condition is not turned off, the ID card cannot be recognized.
Set amount of time before entering Sleep.
Value
For Europe: 1 to 120 minutes (1 minute increments)
Except for Europe: 1 to 240 minutes (1 minute increments)
Select the method of recovery from energy saver.
Value:
Full Recovery:
Normal Recovery:
Power Saving Recovery: This mode enables the use of desired functions only.
Configure settings for switching the machine to OFF and waking it automatically at a specified
time for each day of the week.
Select whether to use Weekly Timer.
Value: Off, On
Specify the time for each day of the week at which the machine turns OFF.
Set the number of retries for turning OFF this machine.
Value: Limited Retries, Unlimited Retries
NOTE
If [Limited Retries] is selected, set the number of retry. The setting range is 0 to 10. Retry is
not performed when "0" is set.
If [Unlimited Retries] is selected, retry is performed until the machine turns OFF.
Set the retry interval.
Use [-] / [+] to enter a number.
Value: 10 to 60 seconds (increments of 10 seconds)
8-47
Description
This mode enables the use of all functions immediately.
However, this mode saves less energy.
In this mode, you can select the method from the following:
enabling the use of all functions immediately or enabling the
use of desired functions only.
If you want to use all functions immediately, select the [Energy
Saver] key to execute recovery.
This mode saves energy most effectively.