Kyocera ECOSYS M6235cidn Operation Manual page 310

Setup and Registration (System Menu) > System Menu
Item
IPv6
IPv6
Manual Setting
RA (Stateless)
DHCP
Restart Network
IMPORTANT
After changing the setting, restart the network or turn the machine OFF and then ON.
Wired Network Settings
Configure wired network settings.
Item
TCP/IP Setting
LAN Interface
IMPORTANT
After changing the setting, restart the network or turn the machine OFF and then ON.
Set up TCP/IP (IPv6) to connect to the network. This setting is available when [TCP/IP] is [On].
Select whether to use IPv6.
Value: Off, On
NOTE
Selecting [On] displays IP address in [IP Address (Link Local)] after restarting the network.
Manually specify the IP address, prefix length, and gateway address of TCP/IP (IPv6).
Value
IP Address (Manual): 128-bits address is expressed in eight groups consisting of four-
digit hexadecimal digits. The groups are separated by colon (:).
Prefix Length: 0 to 128
Default Gateway: 128-bits address is expressed in eight groups consisting of four-digit
hexadecimal digits. The groups are separated by colon (:).
NOTE
• This function is displayed when [IPv6] is set to [On].
• To enter "Default Gateway", set [RA (Stateless)] to [Off].
Select whether to use RA (Stateless).
Value: Off, On
NOTE
• This function is displayed when [IPv6] is set to [On].
• Selecting [On] displays IP address in [IP Address (Stateless)] after restarting the network.
Select whether to use the DHCP (IPv6) server.
Value: Off, On
NOTE
• This function is displayed when [IPv6] is set to [On].
• Selecting [On] displays IP address in [IP Address (Stateful)] after restarting the network.
Restarts the network.
For details on setting value.
TCP/IP Setting (page 8-29)
Specify the settings for the LAN interface to be used.
Value: Auto, 10Base-Half, 10Base-Full, 100Base-Half, 100Base-Full, 1000BASE-T
8-30
Description
Description