Kyocera ECOSYS M6235cidn Operation Manual page 317

Setup and Registration (System Menu) > System Menu
Item
REST over SSL
Protocol Setting
Port Number
Available Network
*2
(Wi-Fi Direct)
Available Network (Wi-Fi)
Available Network
(Wired Network)
*1 The setting will be changed after restarting the device or network.
*2 Displayed only when the wireless network function is available on the machine.
*3 Set "SSL" to [On] in Security Settings.
Security Settings (page 8-37)
IMPORTANT
After changing the setting, restart the network or turn the machine OFF and then ON.
Security Settings
Item
SSL
IPP Security
HTTP Security
SMTP Security
POP3 Security (User 1)
POP3 Security (User 2)
POP3 Security (User 3)
Ping
Item
Ping
-
Select whether or not to use REST over SSL.
Value: Off, On
Set the REST over SSL default Port Number. The default port number is 9081.
Value: 1-32767
NOTE
This function is displayed when [Protocol Setting] is set to [On].
Set whether to enable this function for each network.
Value: Disable, Enable
*2
NOTE
This function is displayed when [Protocol Setting] is [On] and the optional Wireless Network
Interface Kit is installed.
Select whether or not to use SSL.
Value: Off, On
Select the IPP security level. This setup is available when SSL is [On].
Value: IPP/IPP over SSL, IPPoverSSL only
Select the HTTP security level. This setup is available when SSL is [On].
Value: HTTP/HTTPS, HTTPS Only
Select the communication protocol according to the type of security employed by the SMTP
server. This setup is available when SSL is [On].
Value: Off, SSL/TLS, STARTTLS
Select the communication protocol according to the type of security employed by the POP3
server. This setup is available when POP3 is [On].
Value: Off, SSL/TLS, STARTTLS
Checks if communication with the destination by entering the host name or IP address of the
destination is possible.
NOTE
If [Primary Network (Client)] is set to [Optional Network], this item is not displayed.
Description
*1, *3
Description
Description
8-37
*1