Kyocera ECOSYS M6235cidn Operation Manual page 152

Preparation before Use > Registering Destinations in the Address Book
The Folder (FTP) Address
[FTP] > [Host Name], [Path], [Port], [Login User Name] and [Login Password] > [OK]
The table below explains the items to be entered.
Item
Host Name Host name or IP address of FTP server
*1
Path Path for the file to be stored
For example: User\ScanData
If no path is entered, the file is stored in the home directory.
Port Port number
(Normally 21.)
Login User Name FTP server login user name
Login Password FTP server login password
*1 When the FTP server is based on Linux/UNIX, the path including the sub-folder is combined by the
slash "/" not using the back-slash.
NOTE
• Refer to the following for details on entering characters.
Character Entry Method (page 11-11)
• Select [Menu] > [Connection Test] to check the connection to the FTP server you chose.
If the connection fails, check the entries you made.
1
To specify the Address Number, select [Address Number].
2
Use [+] / [-] or the numeric keys to enter an address number (001 to 250).
To have the number assigned automatically, enter "000".
NOTE
• Address Number is an ID for a destination. A free number can be selected.
• If you specify an address number that is already in use, an error message appears.
3
Select [OK].
4
Check if the destination entry is correct > [Save]
The destination is added to the Address Book.
Descriptions
3-25
Max. No. of
Characters
Up to
64 characters
Up to
128 characters
1 - 65535
Up to
64 characters
Up to
64 characters