Advertisement
Recorder: Full Setup
The recorder setup detailed in the Quick Connection Guide is a simplified
setup. In order to access features using the recorder interface, you must
complete the full setup detailed below.
To set up the recorder:
1. Connect the recorder to your router
using the included Ethernet cable.
3. Connect a monitor (not included) to
the HDMI port of the recorder with
the included HDMI cable.
Recorder: Initial Setup Wizard
For users who wish to use the recorder interface rather than connecting to
the system using the Lorex Cirrus app, you will have to complete the recorder
Setup Wizard to confirm the correct date and time for the system.
NOTE:
If you did not use the Lorex Cirrus app for initial setup, you will be
prompted to enter the default username (admin) and password (00000000),
and then create a new password for the recorder.
To complete the setup wizard:
1.
Log in using the system user name (default: admin) and your new, secure
password you recorded on the Quick Connection Guide.
2.
The Setup Wizard launches. Click Next to begin.
3.
Click the arrow keys to select a
language for the on-screen display. Click Next
to confirm.
4.
Click the arrow keys to select your region. Click
Next to confirm.
5.
Enter the date and time:
6.
Review the information you have set for the recorder. Click Accept to confirm.
Recorder: Quick Menu
Right-click anywhere on the live viewing screen to open the Quick Menu.
2. Connect the included mouse to the
Mouse / Backup USB port.
4. Connect the included power adapter
to the recorder. Wait a few minutes
for the system to start up.
Click to select the correct date
from the calendar.
Select the correct time zone from
the dropdown.
Select a time format from the
dropdown. For 12Hour format,
select either AM or PM from the
second dropdown.
Click Next to confirm.
Open the Main Menu.
Select camera / live display view.
Search for and play back recordings.
Back up video recordings or snapshots
to a USB flash drive (not included).
Recorder: Using the Mouse
1. LEFT-CLICK:
• During split-screen display mode:
Double-click an individual channel to view it
in full-screen. Double-click again to return
to the split-screen display mode.
• While navigating menus:
Click to open a menu option.
2. RIGHT-CLICK:
• During live view:
Right-click anywhere on the screen to
open the Quick Menu.
• While navigating menus:
Right-click to exit menus.
3. SCROLL WHEEL:
• While navigating menus:
Scroll to move up / down through the menu content.
NOTE:
In live view, hover the mouse cursor over the top of the screen
to open the Navigation Bar. Move the mouse cursor away from the
top of the screen to close the Navigation Bar.
Recorder: Search and Playback
Search for and play back video recordings on the recorder.
To play back recorded video:
1.
From live view, right-click and then click Playback.
Log in using the system user name (default: admin) and your new, secure
2.
password you recorded on the Quick Connection Guide.
3.
Use the calendar on the left-side of the screen to select the date to playback.
4.
Check off the channels you would like to search for recordings from on the left-
side of the screen.
5.
Click
to search for recordings.
6.
Search results appear as thumbnails. Double-click any recording to begin video
playback.
Select
the day to
playback
Select
channels to
playback
Click to
search for
recordings
Recorder: Backup
Back up video recordings to a USB flash drive (not included).
To back up recorded video:
1.
Insert a USB flash drive (not included) into one of the USB ports marked Mouse /
Backup on the back of the recorder.
NOTE:
It is recommended to format USB flash drives prior to using them with your
wire-free system.
2.
From live view, right-click and then click Backup.
Log in using the system user name (default: admin) and your new, secure password
3.
you recorded on the Quick Connection Guide.
4.
Configure the following:
a. Date: Enter the date to search
for recordings from.
b. Time: Enter a start and end
time for your search.
c. Channel / Type: Select the
channel and recording type
to search for, or select All
to browse all channels and
recording types.
d. Search / Quick Backup: Click
Search to show all recordings
that fit your search criteria, or
click Quick Backup to back up
all recordings that fit the search criteria.
e.
(Not applicable for Quick Backup) Recordings that fit the search are shown on
screen. Check recordings you want to back up, then click Backup.
5.
The Backup Type screen appears. Select a filetype for your backup files, then
click Save.
6.
The USB flash drive contents are shown on screen. Navigate to the location you
want to save the backup files in, then click OK to begin the back up. Progress is
shown on screen.
NOTE:
Do not disconnect the USB flash drive until the backup is complete.
1
3
a
c
e
LHWF1000_QRG_EN_R3
2
Double-click
any event
to begin
playback
b
d
Advertisement
