Gathering; Pintucking - Janome Memory Craft 6650 Instruction Book

q
z
c
b
q
q
w
e r
0.6 cm
x
v
w
e r

Gathering

q Pattern:
w Presser foot:
e Thread tension:
r Foot pressure:
z Loosen the thread tension to "1" and increase the
stitch length to 5.00.
Pull both threads 10 cm (4˝) under and behind the
presser foot (refer to page 25).
x Sew two rows of straight stitches 0.6 cm (1/4˝) apart.
Knot the threads at the beginning.
c Pull the bobbin threads at the end to gather the fabric.
v Knot the threads at the end and distribute the gathers
evenly.
b Prepare the fabric to attach the gathering.
Tighten the thread tension to "4" and decrease the
stitch length to "2.40" (default settings).
Place the wrong side of the fabric q under the
gathering.
Sew the straight stitch between the two gathering
rows.
Remove the two rows of straight stitches.
NOTE:
You may sew the straight stitch under the two
gathering rows to cover the remains of gathering rows.

Pintucking

q Pattern:
w Presser foot:
e Thread tension:
r Foot pressure:
Fold the fabric with the wrong sides together.
Place the folded fabric under the blind hem foot.
Align the edge of the fold with the guide on the foot, and
lower the foot.
You may adjust the needle drop position to 0.5-1.5 if
necessary.
Sew while guiding the edge of the fold along the guide.
Open the fabric and press the tuck to one side.
48
MODE 1: 1 or MODE 2: 001
Zigzag foot A
1
3
MODE 2: 004
Blind hem foot G
2-6
3