Function Keys And Jog Dials - Janome Memory Craft 6650 Instruction Book

q
w
e
r
t
y
u i

Function Keys and Jog Dials

q
u
q Mode key (refer to page 29)
When the power is turned on, the pattern selection mode
1 is set automatically.
Each time you press the mode key, the mode will change
from 1 to 3. The selected mode is indicated on the upper
left corner of the LCD screen.
w Stitch display key (refer to pages 30, 32, 91)
In mode 1, press the stitch display key to open or close
the direct pattern reference window.
In mode 2 or 3, press the stitch display key to open or
close the pattern selection window.
e Twin needle key (refer to page 80)
Press this key when sewing with a twin needle.
r Mirror image key (refer to pages 85-86)
Press this key to sew a mirror image of the selected
pattern.
t Elongation key (refer to page 78)
Press this key to elongate satin stitch patterns.
y Bobbin winding key
Press this key to wind the bobbin (refer to page 20).
u Stitch width adjusting dial (refer to pages 32, 33,
39, 50, 89-91, 95-96, etc)
Turn this jog dial to alter the stitch width or needle drop
position of the selected stitch pattern.
You can also alter the page number or move the cursor
with this dial .
i Stitch length adjusting dial (refer to pages 32, 33,
39, 50, 92, 95-96, etc)
Turn this jog dial to alter the stitch length of the selected
pattern.
You can also move the cursor with this dial.
11
w e r
i
t y